hi PLZ Clear passWord bios hp 450 g2 la-b181p rev 1.0
HP Probook 450 G2 440 G2 LA-B181P BIOS + 470 G2
Collapse
X
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hello, I appreciate any help you can give me with this .bin file for this HP ProBook 440 G2 model. It shuts down after 30 minutes. I installed a bin file that doesn't shut down, but a BIOS error appears due to the serial numbers, etc. I'm leaving a copy of the original and the data, including the one that works but shows a serial error.
EQUIPO:
Modelo: HP ProBook 440 G2
Placa: LA-B181P Rev 1.0
Serial Number : CND43352DG
SKU Number : J2M22LT#ABM
Asset Tag : (vacío)
UUID : FF2E8A99-FD33-E411-A300-2286570180FF
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
hello pls can someone remove password for this bin
hp probook 450 g2
s/n cnd52844zmAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
hi tryAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
i have a problem with my pc hp probook 450 G2 power light blinks when i press the power button the mother board model is LA-B181P
S/N CND5285WLC
THIS IS IT ORIGINAL BIOS PLS HELP ME !!
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
Related Topics
Collapse
-
by studdy05Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by cr4zychrissHello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Channel: BIOS Requests ONLY!
-
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.

Comment