i am looking for dell studio 1457 original bios dump
1p-0098j01-8000 (iris)
h900 high
rev a00
(with ati graphics)
1p-0098j01-8000 (iris)
h900 high
rev a00
(with ati graphics)
-
This specification for the HP ZBook Studio G4 + DreamColor Z27x Studio Display Mobile workstation can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Studio G4 + DreamColor Z27x Studio Display boardview and Studio G4 + DreamColor Z27x Studio Display schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps...09-06-2024, 06:00 AM
-
Hi there everyone!
I am awaiting on a CH341 programmer and a WSON 6x5 probe to dump the flash of a Dell 7320 8FC8 with Winbond 25R256JVEN chip, in the meantime I'd like to get things ready in order to maximise my chances of success. I have seen a few tools around, NeoProgrammer, Universal BIOS Backup ToolKit, CH341A Programmer, Flashrom to name some. Which one is the most recommended/suitable for this kid of application? The only one that seems to have support is NeoProgrammer New Update V2.2.0.10.
I find my self a bit confused, and I would rather getting a clean dump...09-09-2025, 01:53 AM -
Hello everyone,
I need the EC firmware dump for Dell Latitude 5420, motherboard GDF40 LA-K491P Rev 3.0 (A02).
The embedded controller is MEC5107-LJ (UE1).
The EC flash chip is W25Q80DV, 8Mbit (1MB).
I already have the 32MB BIOS dump (W25Q256JV), but my system is still not powering on — just amber blink. I suspect the EC firmware is missing or corrupted.
If anyone has this board and can share their EC dump from the 25Q80DV, I’d be very grateful.
Thank you in advance!... -
Hi guys I have a DELL that does not charge.
I bought new original battery and charger and when it turns on the percentage of charge drops.
here is the link to the diagram:https://www.badcaps.net/forum/troubl...oogle_vignette
I checked that on the +SDC_IN pin I have 19.8V
on ISL9538HRTZ
Pin 17 = 19V
Pin 18 = 5V
Pin 19 = 3.6V
Pin 21 = 3.1V
Pin 22 = 3.1V
Pin 24 = 3V
... -
This specification for the MSI Creator Z16HX STUDIO B13VFTO-053 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Z16HX STUDIO B13VFTO-053 boardview and Z16HX STUDIO B13VFTO-053 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-07-2024, 06:38 AM
Comment