Monster Tulpar T7 V25.1 bios

[s_specialist]

Monster Tulpar T7 V25.1 (same MSI GE76 RAIDER 11UG) isn't working. The motherboard outputs 19V, the supply voltages are 3.3V and 5V, the chipset voltage is 1.05V, and the BIOS voltages are all there, but it still isn't working. I replaced the FH82HM570 (SRKMA) and it still isn't working. Has anyone else encountered this issue? What can I do? I'm looking forward to your help. I'm sending you the original BIOS file.
Motherboard Name : MS-17K31 Ver 2.0
Serial No : K2201N0154214

[peste]

Monster Tulpar T7 V25.1 (same MSI GE76 RAIDER 11UG) isn't working. The motherboard outputs 19V, the supply voltages are 3.3V and 5V, the chipset voltage is 1.05V, and the BIOS voltages are all there, but it still isn't working. I replaced the FH82HM570 (SRKMA) and it still isn't working. Has anyone else encountered this issue? What can I do? I'm looking forward to your help. I'm sending you the original BIOS file.
Motherboard Name : MS-17K31 Ver 2.0
Serial No : K2201N0154214

maybe this will help you..
https://www.msi.com/Laptop/GE76-Raid...76-Raider-11UG

[LBTT1121]

Monster Tulpar T7 V25.1 (same MSI GE76 RAIDER 11UG) isn't working. The motherboard outputs 19V, the supply voltages are 3.3V and 5V, the chipset voltage is 1.05V, and the BIOS voltages are all there, but it still isn't working. I replaced the FH82HM570 (SRKMA) and it still isn't working. Has anyone else encountered this issue? What can I do? I'm looking forward to your help. I'm sending you the original BIOS file.
Motherboard Name : MS-17K31 Ver 2.0
Serial No : K2201N0154214

try and feedback

[s_specialist]

Unfortunately, it still didn't work. It wouldn't boot even with the BIOS I downloaded and installed from the MSI website. Another component appears to be faulty, and since there's no boardview or schematic, it's difficult to trace the circuit.

[SMDFlea]

Unfortunately, it still didn't work. It wouldn't boot even with the BIOS I downloaded and installed from the MSI website. Another component appears to be faulty, and since there's no boardview or schematic, it's difficult to trace the circuit.

Where did you get the replacement PCH from was it new or from a donor board, and if from a donor from which motherboard.

[s_specialist]

I bought it brand new from Aliexpress.

[SMDFlea]

I bought it brand new from Aliexpress.

ok, so the new chip will have no bootguard.

[SMDFlea]

try and feedback

Disable bootguard, it`s currently 5 ,the new chip has no bootguard , set bootguard to 0 ,fill the OEM public key with 00`s

[s_specialist]

Could you please edit the bios I sent and send it, thank you very much.

[SMDFlea]

Could you please edit the bios I sent and send it, thank you very much.

ok

[s_specialist]

I bought a new SRKMA and installed it, and this time it worked. The first SRKMA I installed was faulty, thank you for your help.

[SMDFlea]

You`re welcome :-)