Monster Tulpar T7 V20.2 Bios

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • yucel-yucel
    Senior Member
    • Dec 2017
    • 148
    • türkey

    #1

    Monster Tulpar T7 V20.2 Bios

    Since the Monster Tulpar T7 V20.2 model device did not trigger, I replaced the SR40 south chip. However, it is currently stuck at 0.2 ampere current. I tried different BIOS models, got the trigger but no image. If anyone has the original clean bios of this device, I would appreciate it if you could share it. My original faulty bios is attached.

    MB PCB - GK7MR0R_V1.1 10L
    P/N - MBPGK7MR0A-RM11
    GK7MR0R2202808153
    MNS200715000418
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • protek
    New Member
    • Jan 2019
    • 1
    • türkiye

    #2
    I have the same model too. I need bios

    Comment

  • startrek
    Member
    • Jun 2017
    • 32
    • turkey

    #3
    try this
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Comment

    Related Topics

    Collapse

    • s_specialist
      Monster Tulpar T7 V25.1 bios
      by s_specialist
      Monster Tulpar T7 V25.1 (same MSI GE76 RAIDER 11UG) isn't working. The motherboard outputs 19V, the supply voltages are 3.3V and 5V, the chipset voltage is 1.05V, and the BIOS voltages are all there, but it still isn't working. I replaced the FH82HM570 (SRKMA) and it still isn't working. Has anyone else encountered this issue? What can I do? I'm looking forward to your help. I'm sending you the original BIOS file.
      Motherboard Name : MS-17K31 Ver 2.0
      Serial No : K2201N0154214...
      10-30-2025, 04:53 AM
    • yucel-yucel
      Monster Tulpar V20.3 Clean Me Bios
      by yucel-yucel
      I need Monster Tulpar V20.3 Clean Me Bios.

      The srkma chip was replaced, I tried to do a clean me but I didn't get any results, it opens late.
      Can you do a clean me for my original bios, thank you.

      GM5TG0O222100999
      MNS220330000307​...
      04-21-2025, 07:12 AM
    • macabook
      🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
      by macabook
      Hello everyone,

      I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
      🧩 Initial Issue
      • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
      • External display (HDMI) shows
      ...
      07-24-2025, 02:17 PM
    • cr4zychriss
      [Problem/ Request] Bricked TongFang GK7MRFR BIOS
      by cr4zychriss
      Hello everyone,
      I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
      I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
      • Barebone / Chassis: TongFang GK7MRFR
      • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
      • Rebrand: PC Specialist
      ...
      11-14-2025, 04:04 PM
    • pirati
      ASUS Zenbook Pro Duo UX8402ZA BIOS
      by pirati
      Hello everyone,

      I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.

      When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.

      I decided to try flashing a new BIOS, but since I didn’t want to desolder...
      10-27-2025, 04:20 PM
    • Loading...
    • No more items.
    Working...