Bios Password Removal Request for HP ZBOOK G5, Tried the methods in the main guide and did not work

Collapse
This topic has been answered.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Mohammed Almasri
    New Member
    • Feb 2025
    • 8
    • Germany

    #1

    Bios Password Removal Request for HP ZBOOK G5, Tried the methods in the main guide and did not work

    SN: 5CD9423FGG
    16 and 32 MB files are taken with T48 after desoldering both chips
    thanks in advance
    Attached Files
  • Answer selected by Mohammed Almasri at 09-09-2025, 04:00 PM.
    m1ch43lzm
    Badcaps Veteran
    • Mar 2019
    • 605
    • Peru

    Check here:
    https://www.badcaps.net/forum/troubl...ckup-file-size

    Both backups have extra bytes at the end, that's why RCUnlocker doesn't work, trim the file with hex editor to the correct size, should end at 0xFFFFFF for 16MB

    Try, I used RCUnlocker on the "fixed" 16MB file
    Attached Files

    Comment

    • Mohammed Almasri
      New Member
      • Feb 2025
      • 8
      • Germany

      #2
      could someone help please, the RCUnlocker shows always that i should use a 16mb chip but i am using 16mb file, i really am stuck

      Comment

      • m1ch43lzm
        Badcaps Veteran
        • Mar 2019
        • 605
        • Peru

        #3
        Check here:
        https://www.badcaps.net/forum/troubl...ckup-file-size

        Both backups have extra bytes at the end, that's why RCUnlocker doesn't work, trim the file with hex editor to the correct size, should end at 0xFFFFFF for 16MB

        Try, I used RCUnlocker on the "fixed" 16MB file
        Attached Files

        Comment

        • Mohammed Almasri
          New Member
          • Feb 2025
          • 8
          • Germany

          #4
          Ohhh that is very helpful information, thanks a lot for helping out. I will be trying this

          Comment

          • Mohammed Almasri
            New Member
            • Feb 2025
            • 8
            • Germany

            #5
            Originally posted by m1ch43lzm
            Check here:
            https://www.badcaps.net/forum/troubl...ckup-file-size

            Both backups have extra bytes at the end, that's why RCUnlocker doesn't work, trim the file with hex editor to the correct size, should end at 0xFFFFFF for 16MB

            Try, I used RCUnlocker on the "fixed" 16MB file
            That did actually work, I thank you a lot for the help, i marked your answer as the solution.

            Comment

            Related Topics

            Collapse

            Working...