Hello laptop repair experts,
can someone plese, help me understand the significance of cleaning ME region in a BIOS dump file?
I know that Manegement Engine (ME) data is part of BIOS/UEFI firmware. I know that it contains some HW specific data for the particular laptop.
What I don't know, why do I need to clean ME region if I try BIOS dump file from another laptop (of course same type and model). I'm not sure if this is only because of the serial number (not sure if that is stored in ME region at all).

Recently, I had a two cases where laptops (one is Lenovo Idepad...

Hello
Can someone help clean the ME region?
I flashed the BIOS with this file and writes intel me unconfiguration in progress when loading
I wanted to try to clean the region myself, but I don't know which and where to get a file with a clean region for this motherboard. And what version do I need?
FITool 10.0.46.1002?
Chipset * North Bridge – Intel Q45 * South Bridge – Intel ICH10...

After upgrading the factory 128Gb SSD to a 512Gb WD_Black SN770M, this surface pro lost touch on screen, no touch in windows or in UEFI.
The Human Interface Devices did find touch and stylus but it shows Disabled in windows device manager.
I am not sure if this is a bios problem or hardware problem, already tried reinstall and reset from windows, not working. And now trying to clean/reset the bios.

Computer model is: Surface Pro 9, i5, 8GB memory, 128GB
Serial number: 0F00S2Y22353BF

Intel(R) ME Code Versions:
BIOS Version 12.200.143
MEI Driver...

It's possibly a Chinese offbrand laptop that uses a generic series of motherboards called y116te. It has no image.All power rails are working. No bios dumps could be found on the internet. Tried similar bios from this thread. No difference. I wanna try cleaning the TXE region of the bios but cleaning TXE region seems too advanced for my skills. Please help clean the TXE region from this dump ...

Hello everyone,

I got a Acer Nitro 5 gaming laptop that recently stopped working. I found out that the 3v rail was shorted because of a dead PCH so i ordered a replacement already and i'd like to clean up the ME Region from the bios dump i made with my CH341A programmer (modded to 3v). I used ME Analyzer along with the other tools needed and came across a issue where i can't replace the ME Region with the other file because the size is too big ? I'm not completely familiar with this and i'd like to know what i would have to do to fix it....