ASUS ROG Strix G17 G713QE-HX043

[DW356]

Hi,

I've found this thread by the motherboard model number, I also have the same problem, here are the details:
Motherboard: G513-6050A3249301-MB-A03(A3)
S/N: M5NRKD02839720E
Model: G513QC-HN009T
BIOS IC is a Winbond 74M12JWPIQ

Attached the backup.

Thank You for Your help!

Admin Password : xxxxx3187Lavenderp

[szergely]

Hi,

I've found this thread by the motherboard model number, I also have the same problem, here are the details:
Motherboard: G513-6050A3249301-MB-A03(A3)
S/N: M5NRKD02839720E
Model: G513QC-HN009T
BIOS IC is a Winbond 74M12JWPIQ

Attached the backup.

Thank You for Your help!

Hi,

Thank You for the help, it worked, but something went wrong.
I cleared admin pass, loaded BIOS defaults, and was presented with a password screen on reboot.
On this screen, the password doesn't work anymore, I don't know what went wrong.
Attached new dump.

Thank You again!

[peste]

Hi,

Thank You for the help, it worked, but something went wrong.
I cleared admin pass, loaded BIOS defaults, and was presented with a password screen on reboot.
On this screen, the password doesn't work anymore, I don't know what went wrong.
Attached new dump.

Thank You again!

try..

[szergely]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

[SMDFlea]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

The chip will not be in the support list, choose a different one thats 1.8V and untick verify

[peste]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

there is nothing protected...are you doing something wrong...the aiscosm chip on the board?