ASUS ROG Strix G17 G713QE-HX043

[arsi_computer]

There is no ME region in the bios file. My file is the original file from Asus.

It turns out that the no display case was after updating the system firmware, after the update it no longer displays, how do I fix it? Windows 11 automatically updates after connecting to the internet.

[arsi_computer]

There is no ME region in the bios file. My file is the original file from Asus.

I downloaded this from the Asus website, but I don't know how to edit the BIOS, because the size is also different.

[hoaca388]

or please help me clear this bios, thanks

There is no ME region in the bios file. My file is the original file from Asus.

[arsi_computer]

ROG Strix G17_G713IC

After my display ran the test for hours, it was also safe, After I ran the display test for hours, it was also safe, I was afraid that after I didn't give it to the customer, there would be no display anymore

[arsi_computer]

Find hardware problem.

I just flashed a website and the network disk can display normally, but in 3 days I don't know whether it will display again or not.

[hoaca388]

I have flashed it with this BIOS, the result is it lights up for a while before displaying, then it turns off, the vcore voltage is already present at 1.1v

Find hardware problem.

[arsi_computer]

ROG Strix G17_G713IC

I have flashed it with this BIOS, the result is it lights up for a while before displaying, then it turns off, the vcore voltage is already present at 1.1v

[hoaca388]

help Me Master, I have an Asus ROG Strix G713IC-R735B6T-O, the problem is no display and the aircraft light is on, I tried flashing it with another BIOS, it can display, and the aircraft light is no longer on, but after 3 days, there is no display again, and the aircraft light is on again, I have included the original BIOS, please help me fix it, thank you.
G713IC-R735B6T-O
SN: M8NRKD037587310
G513-6050A3249301-MB-A03(A3)

ROG Strix G17_G713IC

[arsi_computer]

help Me Master, I have an Asus ROG Strix G713IC-R735B6T-O, the problem is no display and the aircraft light is on, I tried flashing it with another BIOS, it can display, and the aircraft light is no longer on, but after 3 days, there is no display again, and the aircraft light is on again, I have included the original BIOS, please help me fix it, thank you.
G713IC-R735B6T-O
SN: M8NRKD037587310
G513-6050A3249301-MB-A03(A3)

[peste]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

there is nothing protected...are you doing something wrong...the aiscosm chip on the board?

[SMDFlea]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

The chip will not be in the support list, choose a different one thats 1.8V and untick verify

[szergely]

Hi,

It seems I can't program this IC, is it possible that it's write protected?
The programmer seems to do its job, then the verify fails, with 161 bytes of difference, the IC contents are the same as the dump I posted.
I'm using an "old" MiniPro programmer (TL866), it never let me down so far.

[peste]

Hi,

Thank You for the help, it worked, but something went wrong.
I cleared admin pass, loaded BIOS defaults, and was presented with a password screen on reboot.
On this screen, the password doesn't work anymore, I don't know what went wrong.
Attached new dump.

Thank You again!

try..

[szergely]

Hi,

I've found this thread by the motherboard model number, I also have the same problem, here are the details:
Motherboard: G513-6050A3249301-MB-A03(A3)
S/N: M5NRKD02839720E
Model: G513QC-HN009T
BIOS IC is a Winbond 74M12JWPIQ

Attached the backup.

Thank You for Your help!

Hi,

Thank You for the help, it worked, but something went wrong.
I cleared admin pass, loaded BIOS defaults, and was presented with a password screen on reboot.
On this screen, the password doesn't work anymore, I don't know what went wrong.
Attached new dump.

Thank You again!

[DW356]

Hi,

I've found this thread by the motherboard model number, I also have the same problem, here are the details:
Motherboard: G513-6050A3249301-MB-A03(A3)
S/N: M5NRKD02839720E
Model: G513QC-HN009T
BIOS IC is a Winbond 74M12JWPIQ

Attached the backup.

Thank You for Your help!

Admin Password : xxxxx3187Lavenderp

[szergely]

Hi,

I've found this thread by the motherboard model number, I also have the same problem, here are the details:
Motherboard: G513-6050A3249301-MB-A03(A3)
S/N: M5NRKD02839720E
Model: G513QC-HN009T
BIOS IC is a Winbond 74M12JWPIQ

Attached the backup.

Thank You for Your help!

[Riddan]

Hi, soldered the chip back and everything worked great again, thank you very much Thomas

[hoaca388]

Hi,
SN; N1NRKD022712016
Model; G713IC-HX010W

Admin Password : 4055
Boot Password : Ice2

[Riddan]

Hi,
SN; N1NRKD022712016
Model; G713IC-HX010W

[hoaca388]

Hello.
Here's my bump file, can anyone help me get the password out on the bios, If you need more information, I'll post it with // Thomas

Serial number ?