HP ZBook Firefly 14 G8
SN# 5CG2204R8Y
NEED bios repair please, Not display.
Attached Files
SN# 5CG2204R8Y
NEED bios repair please, Not display.
Attached Files
-
-
Where is the bios on this laptop..there's a lot of winbond ic on this laptop. There is 3 in bottom . And 1 on topComment
-
I see it. The EC bios. Is at the bottom and the top is the main bios. Am I right?Comment
-
HI GUYS,I HAVE HP ZBOOK FIREFLY 14 G8
BIOS PASSWORD
SN::::5CG2201FT1
PLS HELP ME UNLOCKComment
-
This specification for the HP ZBook Firefly ZBook Firefly 14 G8 Mobile Workstation Bundle Mobile workstation can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the ZBook Firefly 14 G8 Mobile Workstation Bundle boardview and ZBook Firefly 14 G8 Mobile Workstation Bundle schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on...09-07-2024, 05:20 AM
-
Hello
Need BIOS unlocked
HP ZBook Firefly G10A AMD version
Both chips dump below
SN: 5CG41818RH
Thanks so much
...
-
Hello
I have an HP ZBOOK FIREFLY 14 G10 A (AMD) model with HP Blink Error 2-2 (Main area DXE of BIOS has become corrupted and no binary recovery image available.) I have tried BIOS recovery USB but it didnt work.
Tried using a "clean" bin extracted from the HP softpaq but laptop would not even respond to power button, although it had white LED on DC jack.
Here is back up of the BIOS, hope somebody can help. Thanks
... -
hi
Please Bios hp ZBook Firefly 14 inch G9
FF14-MV-GCE 6050A3310001-MB-A01
SN : 5CG31412Q7
thanks... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM
Comment