Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
thank you all
-
-
Thank you sir that has worked.
So did you search for other instances of the encrypted password in the dump and 00 them out?
And you do it this way if the encrypted password is not same length as the Decrypt Challenge hex?
5B93B62611BA6C4DC7E022747D07D89A332E8EC1E95444E89F7BFA0E55A2B0350BC9665CC1EF1C83...
Leave a comment:
-
-
-
Asus TP412FA
Hello
I have ASUS M413IA-EB848T laptop with startup password.
Board number is X421IA
I tried searching for AMITSE section in bios dump, but hex for password was not same length as the decryption hex from SMDFlea guide. (picture 1). I try 00 out the password and leaving 01 before the end (picture 2) but it not work. What is going wrong?, i like to figure out how it works.
BIOS dump is attached.
Thank you...
-
IT8227E-128 Compatibility
Hello does anyone know if IT8227E-128 is compatible/replaceable with any other SIO?
Thanks
-
Re: Lenovo Chromebook IDEAPAD 5 14ITL6 Enrollment Lock Help
Thanks for you help, i guess that is on the newer model of chromebooks?...
Leave a comment:
-
Re: Lenovo Chromebook IDEAPAD 5 14ITL6 Enrollment Lock Help
excellent thank you, it has worked, i no longer get asked for enrollment when connect to wi-fi
I missed to change the two bytes for "stable_device_secret"
does it matter which bytes you have to change? and how many?
thank you...
Leave a comment:
-
Lenovo Chromebook IDEAPAD 5 14ITL6 Enrollment Lock Help
Hello i have Lenovo Chromebook IDEAPAD 5 14ITL6 that has the Enrollment Lock enabled.
I have followed guide to dump bios image and use hex editor to 0 out "check enrollment" and "block dev mode"
also first_active_omaha_ping_sent is 0 and should_send_rlz_ping is 0
after programmed new bios, i start chromebook with ESC+REFRESH+POWER
plug usb with recovery image in, chromebook installs new image ok
then restarts, i powerwash system then reboot.
Now i set up wifi and proceed setup but enrollment...
-
Re: Need bios Inspiron 13 5378
Thank you sir, it is working now....
Leave a comment:
-
Re: Need bios Inspiron 13 5378
Brand: Dell
Model: Inspiron 13 5378
Board number: 15296-1
Service tag = 9V6G4F2
Board has all voltages, cpu is getting warm but no POST. can anyone fix Thanks...
Leave a comment:
-
Re: Dell 3780 EDI73 LA-G711P bios
apologies, it is for Inspiron 3780 and Vostro 3580, both model names are in bios dump.
I have Dell Vostro 3580 / Inspiron 3780, it no post, voltages are present on cpu and gpu and they get warm. Just 2 amber led flash.
if someone can fix please....
Leave a comment:
-
Re: Dell 3780 EDI73 LA-G711P bios
Hello
I have Dell Vostro / Inspiron 3570, it no post, voltages are present on cpu and gpu and they get warm. Just 2 amber led flash.
if someone can fix please.Last edited by SMDFlea; 07-19-2023, 10:16 AM.
Leave a comment:
-
Re: Bios dump for my Dell Inspiron 15 5570
All is good now, thanks...
Leave a comment:
-
Re: Bios dump for my Dell Inspiron 15 5570
in top of the picture, it should say model name like "Inspiron 5570"...
Leave a comment:
-
Re: Bios dump for my Dell Inspiron 15 5570
Thank you sir, the board will now post, but it says "Product Name: Unidentified System"
Can i change this in hex editor?...
Leave a comment:
-
Re: Bios dump for my Dell Inspiron 15 5570
sorry my mistake, here is the original dump.
Symptoms were only powering on for 2-3 seconds then off.
I attempted to rebuild the image using original Dell exe and PFS extract,
i put original dump in FIT tool, and replaced ME region and BIOS region with that from exe extract. This gave me the symptoms mentioned in my first post....
Leave a comment:
-
Re: Bios dump for my Dell Inspiron 15 5570
Dell Inspiron 5570 CAL60 LA-F114P Rev 1.0 (A00)
board will not post, voltages are present, cpu gets warm, but fan pulses every 2 seconds, no picture.
Is possible to fix please?...
Leave a comment:
No activity results to display
Show More
Leave a comment: