IDH5A LA-M366P DELL VOSTRO 15 3530

[izaak94]

Hello, could someone help me repair this file, I don't have an image, it only restarts 2 times.
ST:2MQXN93

[minhdigital]

Hello, could someone help me repair this file, I don't have an image, it only restarts 2 times.
ST:2MQXN93

Send to you, Try

[izaak94]

It has already been tested, it turns on but without an image, it only restarts once and it no longer turns on

[tracker1]

Dell Vostro 15 3530
IDH50 LA-M366P Rev:1.0 (A00) 2023-01-04
From working mainboard, maybe it helps someone.

[3pka]

Is there someone tested it?

[SMDFlea]

Tested what ? .If you want help post your own backup and the service tag https://www.badcaps.net/forum/troubl...before-posting

[Bios White]

Dell Inspiron 3530
IDH50 LA-M366P Rev:1.0 (A00) 2023-01-04
Tag JL60DZ3
The machine hangs the Dell logo

Please FIX, many Thank

[SMDFlea]

Service tag is Vostro 3530 not inspiron

[dhan]

Hello admin,
I can't find any post for this case or please move to correct thread If I posted wrong.
Is there a way to remove an HDD password?
Laptop works fine If SSD was change.
Just want to know if there is a solution for this case or some software password generator.

Thank you

[peste]

post merged...

[peste]

post S/T full name and model, motherboard model,,etc.

[dspok]

ST: 56SJS64
LA-M366P

Password locked, please unlock. BIOS file from dell support won't work.

[SMDFlea]

ST: 56SJS64
LA-M366P

Password locked, please unlock. BIOS file from dell support won't work.

Read the bios password guide, try to unlock it yourself -> https://www.badcaps.net/forum/troubl...rces-and-tools

[baiceanu_stefan]

Hello, I have a
vostro 15 3530
service tag D98VPZ3
mb LA-M366P
ataching the original dump
it seems to be in a Update loop. The client updated the laptop and the no image. sometimes it gets image but after restart is blank again only caps light on. I cannot seem to repair the original dump atached. Maybe someone can help. Thanks.

[VANTHI]

Working file tested by me with ST: 6K3M044

[sonic_electronic011]

If BIOS on post #11 hangs on logo, just clear ME, working perfectly!