this is original file for my macbook if somebody could help remove the efi lock i will be very grateful.
thanks
thanks
-
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
-
Macbook pro a1398 emc 2909 serial c02rl15pg8wl
Motherboard 820-0138a i need a efi removalComment
-
try..Originally posted by JasiqiLabeat View PostDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi,
I have macbook pro A1398 ,EMC 2909 it is EFI locked can some please unlock the file for me? RegardsComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
The bios sent is empty..check and post again..the bios must have 8MB not 16MB...Originally posted by magictouch View PostDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi,
The serial Number: C02TNDYXG8WN
Motherboard part Number 820-00138-A
I7 16gb Ram Version.
i have read the bios a few times it saving as 16mb file, I am reading it via clip.Comment
-
empty bios...don't use the clip it gives errors..remove the bios chip from the board before reading or writing, if you don't have something to solder wires between the chip and the programmer..the bios must have 8MB..check this with the HxD program you can find it for free..see the other posts in this thread..bios 8MBOriginally posted by magictouch View Post
here is a video as an example...https://www.youtube.com/watch?v=DWWigscuQDY
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
I`ll bet you`re using Auto-detect with the programmer, and it`s chosen the wrong chip. What model is your programmer, CH341A/EZP ? ,and what software version are you using. What part number is on the bios chip .Originally posted by magictouch View PostComment
-
hi,Originally posted by SMDFlea View Post
I am using ch431a pro, software I am using is neo programmer, yes it does not show me the chip model when detected.bios is winbond 25064FV1QComment
Comment