good evening guys ... i am a beginner in this field .. how can i program EC if i only have rt809f ???
-
Last edited by max_sneka2; 03-31-2022, 09:20 AM. -
Re: Ec programming
Atleast mention which kbc you are trying to program??
-
Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.
When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which... -
Is it possible to program npce388na1dx io chip by rt809f programmer ? Is there any way ?08-21-2024, 01:41 AM -
Hi, I'm working on a MSI laptop, Motherboard number MS-16W11, GF-65 Thin 10SDR-459US. Went to another shop because the screen was flickering, but it was working well on an external monitor. The LCD was ordered and the laptop was returned to the customer and it no longer worked. It was then sent to another tech (by the shop who ordered the LCD) and the EC (ENE KB9028Q) was replaced with a donor from another MSI board with different board number and no programming was done. It looks like work was done on PU6 (TPS51225) as well as one of the GPU mosfets was burnt (I removed all three GPU mosfets).... -
I have RT809F but i don't have PEB1 extension. i wanna buy PEB1 but i'm not sure if it supports IT8227vg in Lenovo K14 gen1.
i wanna ty to unlock it using RT809F and PEB1.
maybe someone here tried to do it using RT809F.
any suggestions? -
Epson M3170 Monochrome inkjet printer adjustment program tool.
Hi, i want to reset a epson reset program tool needed to reset the EPSON M3170 PRINTER's Maintenance box,
anyone having it, please share
Thank you
Comment