HP 15 (la-d711p) weird BIOS issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • f-bone
    Senior Member
    • May 2013
    • 96
    • Greece
    #1

    HP 15 (la-d711p) weird BIOS issue

    Hi guys,

    this is the second time I come across this issue.

    The laptop turns on after flashing the bios but only once. If turned off and press ON again the fan will spin fast but no image on screen. Flashing it again brings it back until turned off again.

    Unfortunately there are no schematics (that I could find at least).

    Any pointers?

    BR,
    George
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: HP 15 (la-d711p) weird BIOS issue

      Thats 'coz the soc is dry most likely. When you flash bios ,you are using a lot of heat with hot air gun so the cracked balls gets connected briefly. It has nothing to do with bios.

        Comment

        • f-bone
          Senior Member
          • May 2013
          • 96
          • Greece
          #3
          Re: HP 15 (la-d711p) weird BIOS issue

          I remove the chip using soldering iron to avoid lots of heat... you think it the cpu?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Kjell
              Samsung Series 9 - BIOS issue
              by Kjell
              After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).

              Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...
              08-01-2025, 09:15 AM
            • wizard13
              Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
              by wizard13
              Hello everyone,

              I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

              I have checked the forum and the available documentation but could not find a solution specific to my issue.
              • Brand & Model: Dynabook Satellite Pro C50D-B-100
              • Part Number (P/N): PYU13E-00C00PFR
              • Serial Number (S/N): 22028896H
              • System Configuration (SC): A1PYU13E1127
              • Motherboard Model: IP3_ACN16_MB_V21_20211222A
              • Power Input: DC 19V –
              ...
              02-28-2025, 02:43 AM
            • c.daniel
              Lenovo V310-15IKB weird bios problem...
              by c.daniel
              Lenovo V310-15IKB Type 80T3 laptop, i7 7th cpu with dedicated Ati video
              sn LR09493E
              MB DAOLV6MB6F0 REV. F

              The laptop was working fine, the only problem was that when I turned it on, the screen was hard to turn on, it would wait for about 30-40 seconds before an image appeared on the screen.
              Initially, I updated from windows to Intel Management Engine 11.8 Firmware, restarted, everything was fine.
              Then I updated the bios, also from windows, to the last vs, vs 46. It restarted, those lines with bios update progress appeared, restarted and that's it, since then...
              08-22-2025, 05:39 AM
            • SGVsbG8sIHdvcmxkIQ
              Issue wtih [crisis] BIOS recovery
              by SGVsbG8sIHdvcmxkIQ
              Hi,

              BIOS update bricked my laptop - after restart the was a prompt to Proceed with ROM flash or Abort. None of 2 options worked - upon restart the same prompt shown.

              I downloaded [BIOS update].exe file from Lenovo Support > extracted [firmware descriptor].fd file > renamed it to [correct crisis file name].bin.

              With crisis file on USB drive the Proceed with ROM option launches recovery - after displaying the current and the new BIOS version, the process terminated immediately with validation error:

              Not allow flash. Boot Guard version verification...
              04-28-2024, 03:43 PM
            • Timeeez
              X270 - Bios flashing help
              by Timeeez
              Hello everyone,

              I am still a beginner and want to learn more about flashing bios. First of all, thank you very much for the tutorials made on this forum it helps a lot.

              Lets get straight to the point. When I try to flash the bios of my Lenovo X270 it restarts several times and always returns to the bios that was there at the beginning. When I get the bios from someone on the forum and write it to the bios chip, I always have the same serial numbers. I have the feeling that the pc is reflashing itself. Where could this come from? How to avoid this problem?
              ...
              11-30-2022, 05:17 PM
            • Loading...
            • No more items.
            Working...