x407ma rev 2.1 charger IC?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kalilinux25
    Badcaps Legend
    • Mar 2018
    • 2089
    • ZAMBOANGA SIBUGAY

    #1

    x407ma rev 2.1 charger IC?

    Hi hope someone can help me I have a burn charger Ic but I dont know what tpye of cahrger Ic was this unit is using.

    I also tried a BQ24780S but I was getting a 6V at may AC ok Signal , its very hasrd beacause I cant find a schematic for this unit.

    I tried to test the resistor that is close to pin 5 of the ACOK of the Ic it values around 0.3 omhs is it normal?
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 21517
    • UK

    #2
    Re: x407ma rev 2.1 charger IC?

    boardview - https://www.badcaps.net/forum/showthread.php?p=1068431
    Attached Files
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    Related Topics

    Collapse

    • motormayhem
      Lenovo T460 Only Charges on One Charger
      by motormayhem
      Laptop Question
      Hello,
      I'm working on a Lenovo T460 that has been having trouble charging as of late. Its worked well since I've owned it for a few years. When I went to use it the other day it was dead and wouldn't turn on (was sitting on an Anker 65W GaN charger). After some fiddling with the charger I got it to turn on and start charging, but seemed like the charger was not working as it should (took a few plug and unplug cycles to get it to start charging).

      A day later it was dead again and wouldn't boot/charge no matter what I did. No lights or anything when...
      05-12-2023, 01:46 PM
    • Document Archive
      ASUS X407MA-BV139T Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the ASUS X407MA-BV139T Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the X407MA-BV139T boardview and X407MA-BV139T schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for...
      09-06-2024, 09:17 AM
    • Document Archive
      ASUS X407MA-EB210T Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the ASUS X407MA-EB210T Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the X407MA-EB210T boardview and X407MA-EB210T schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for...
      09-06-2024, 09:17 AM
    • Document Archive
      ISL88739AHRZ ISL88739 Laptop Battery Charger Datasheet
      by Document Archive
      The ISL88739 & ISL88739AHRZ are a highly versatile combo battery charger
      configurable for operating as either a Hybrid Power Boost (HPB)
      charger or a Narrow VDC (NVDC) charger, supporting 2-, 3-, or
      4-cell batteries. Both configurations allow the battery to work with
      the adapter together to supply the system load when it exceeds
      the adapter capability, referred to as system Turbo mode. HPB
      charger configuration reverse-boosts battery energy to the system
      bus to help the adapter provide the system power in Turbo mode.
      NVDC charger configuration...
      11-05-2024, 03:28 PM
    • flat-earther
      how to prevent a connected charger from draining battery when not charging?
      by flat-earther
      I have an RC radio handset(Taranis QX7) which doesn't have internal battery charger which means I had to remove the battery every time I needed to charge it.
      So to improve it, I added a 15W USB-C charger board(link) inside and soldered it to the same connector on the PCB where the battery plugs into, great, now I can simply charge it with a USB-C cable.

      but the problem I found is that after the radio sat for two weeks without being used the 2S 18650 battery that I'm using was at 4.2V!
      So the battery is backfeeding the charger and being drained.

      How can I prevent...
      08-07-2025, 01:04 PM
    • Loading...
    • No more items.
    Working...