P5we0 la-6901p

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lordmmx
    K6 Computers
    • Apr 2015
    • 45
    • Slovakia
    #1

    P5we0 la-6901p

    Hello, we are currently battling motherboard P5WE0 LA-6901P rev 2.0 , that turns on, cpu/gpu warms up normally, we have 3V and 5V , also 1V for CPU and 1V for GPU, but nothing on screen, power led stays off . only led that works is battery charging led.

    any ideas?

    Thanks.
    Tags: None
    • Afrim2021
      New Member
      • Jan 2021
      • 2
      • germany
      #2
      Re: P5we0 la-6901p

      hello you check all the voltage voltages a ion correct now prevoni bios flash if not the fault of ram memory or cpu even graphics card,

        Comment

        Previous template Next

        Related Topics

        Collapse
        • paijo.keren
          BIOS ACER 5750z P5WE0 LA-6901P
          by paijo.keren
          Device: laptop
          Brand: Acer
          Model: Acer Aspire 5750Z series pentium
          Board number: P5WE0 LA-6901p rev 2.0
          problem : 10 second dead ampere 0.3
          01-14-2025, 01:37 AM
        • paijo.keren
          ACER ASPIRE 5750Z P5WE0 LA-6901P REV 2.0
          by paijo.keren
          hello sir i am having trouble with this problem acer 5750z laptop problem not displaying i checked at PL5 = 5v, PL4 + 3V, PL12 = 0V, PL8 = 1.5, PL18 = 0V, PL20 = 0V, PL21 = 0V
          https://www.badcaps.net/forum/docume...ptop-boardview
          12-21-2024, 03:14 AM
        • Paul20
          Acer 5750G P5WE0 LA-6901P images only on external screen
          by Paul20
          Hi everybody,
          I have a problem with this Aspire 5750G P5WE0 LA-6901P Rev. 2.0.
          Everything works normally, but displays only on the external monitor and not on the integrated one.
          I found a short in the Lcd Power area, exactly on the Motherboard pitches of Q1 2 and 3 in short (with component detached).
          No voltage arrives on the LVDS connector on pins +LCDVDD 24 and 25.
          I think the enable of PCH_ENVDD is missing, but I can be wrong.
          I have an identical card in perfect working order, so I was able to do all the measurements, but I couldn't solve anyway....
          07-26-2022, 09:27 AM
        • Lazaros Karypidis
          980TI Jetstream | vCore no heating up
          by Lazaros Karypidis
          Hello Community,

          I am in the process of repairing a Palit 980TI Jetstream. Before that, the GPU was running with new drivers. But as soon as I started a benchmark (or a game) it went off, but the computer stayed on.
          I then wanted to check the phases to see if they switch when there is a load on the card. But I slipped with the measuring tip and (I assume) caused a short circuit on the NCP81162 (phase doubler) (marked green in the photo).
          Since I wanted to be on the safe side, I replaced all three NCP81162 and the PWM controller NCP81174.

          Unfortunately, the...
          1 Photo
          06-25-2025, 11:22 PM
        • jjne
          Yamaha RX V675 sound issues
          by jjne
          I have an old Yamaha RX V675 receiver which is starting to develop issues with the sound, although it doesn't quite match up with what folk normally report with these.

          From cold, the sound cuts in and out. When this happens the amp is losing sync with the optical input (speaker graphic disappears from the front panel). But this is not resolved by putting the unit into pure direct mode. After a couple of minutes this resolves, although there are occasional clicks from the speakers after that.

          At first I thought it was either a speaker relay or the DSP, but I don't think...
          06-24-2025, 07:01 AM
        • Loading...
        • No more items.
        Working...