Hi,
Someone gave me a motherboard and I am trying to repair it.
It comes from a Samsung Np350V5C laptop.
Motherboard model : QCLA4 LA-8861P REV 2.0 with a Celeron processor (for testing) and 1*2gb of ram.
One coil is missing (PL703) on this motherboard. Someone tried to enable UMA.
Problem : each time I power on this motherboard, the motherboard is ON 6 seconds before restarting by herself without shutting down... 11 restarts before shutting down.

The start up button works well, I tried it with another motherboard, I have no problem with it.
The LED (SW1) of the start up button is always OFF, even when the motherboard is ON.
I tried with two different processors.
I tried with two different ram sticks, one by one in each slot.
I tried by inserting a hard drive, it never start/spin. I never hear it.
The only thing which is spinning is the fan. It spins when the motherboard is ON and stop each time the motherboard restart by herself.
Concerning the display, I have no display, no backlight, nothing. I tried with an external monitor in VGA, I have no signal.
So, no BIOS, no Samsung logo, nothing.
Else i tried to take some voltages.

Do you have an idea, what could be the problem ? with the mosfet removed (PL703), the motherboard should use UMA ? so I should have something on screen ? do you think it is a bios problem ? do I need a "UMA" BIOS ? should i remove other chip ? GPU chip ?
Thanks for your advices !
Someone gave me a motherboard and I am trying to repair it.
It comes from a Samsung Np350V5C laptop.
Motherboard model : QCLA4 LA-8861P REV 2.0 with a Celeron processor (for testing) and 1*2gb of ram.
One coil is missing (PL703) on this motherboard. Someone tried to enable UMA.
Problem : each time I power on this motherboard, the motherboard is ON 6 seconds before restarting by herself without shutting down... 11 restarts before shutting down.

The start up button works well, I tried it with another motherboard, I have no problem with it.
The LED (SW1) of the start up button is always OFF, even when the motherboard is ON.
I tried with two different processors.
I tried with two different ram sticks, one by one in each slot.
I tried by inserting a hard drive, it never start/spin. I never hear it.
The only thing which is spinning is the fan. It spins when the motherboard is ON and stop each time the motherboard restart by herself.
Concerning the display, I have no display, no backlight, nothing. I tried with an external monitor in VGA, I have no signal.
So, no BIOS, no Samsung logo, nothing.
Else i tried to take some voltages.

Do you have an idea, what could be the problem ? with the mosfet removed (PL703), the motherboard should use UMA ? so I should have something on screen ? do you think it is a bios problem ? do I need a "UMA" BIOS ? should i remove other chip ? GPU chip ?
Thanks for your advices !
Comment