NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
-
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Thank you... -
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
CheersLast edited by SMDFlea; 10-12-2020, 04:38 AM.Comment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thank youComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Thank you, ac adapter had bad contact and nout displayed "error sending POST to ME system halt".Comment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thanks youComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thanks friendComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Thank you very much!Comment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Thank you very much my friendComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thanks my friendComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Hay,
After programming withNP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC my laptop is not turning on 3VL is present, and I am getting power button on signal it's giving 3vs to bios. I think wrong bios cause this
Anyone can send NP350V5C QCLA4 LA-8861P Rev 1.0 Bios + EC + KBCComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
Sorry it's not getting +3VS. And power button signal stands for 3seconds and it goes offComment
-
Comment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thanks my brotherComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thanks youComment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
thank you, my friend, very wellComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: NP350V5C QCLA4 LA-8861P Rev:2.0 Bios + EC + KBC
ok, thanks
i have done backup then i have load "MAIN DUMP WORK OK .BIN" on my UH3 chip, but Notebook don't work,
(at start, turn on the blue light (on/off) and after 5 sec turn off and screen always off)
i have to load also .bin in UH4 chip?Comment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Product Name: Razer Blade 15 (2022)
Product ID: RZ09-0421
Motherboard: CH580
BIOS Versions I work with: 2.02 & 2.06
Bios File Size: 32,768 KB
Dear Forum Readers!
I'm looking for a BIOS modder or anyone with experience who would give me suggestions about my razer blade's BIOS settings.
I can view and edit the content of the BIOS .bin file with AMIBCP BIOS editor.
The BIOS files I'm working with are from badcaps.net and those are CLEAN BIOS files (anyone can find it with the search string: RZ09-0421).
!!! MY RAZER BLADE...11-24-2025, 05:52 PM
Comment