What is this SMD component?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 73buick
    Member
    • Mar 2011
    • 41
    • USA
    #1

    What is this SMD component?

    Does anyone know what the SMD CL2 is in this pic? It looks like a fuse, but not sure. Can't find anything on what CL stands for. It is currently reading at 0 ohms and has no continuity.

    Just fixed this laptop for a client and it worked for a few days and now won't power up. Getting 19V out of the DC jack harness, but only 1V on the battery charge pins. Just trying to narrow down what it could be and came across this CL2 piece which I thought was a possible fuse.
    Attached Files
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: What is this SMD component?

      It seems like a filtering Cap not fuse.

        Comment

        • R_J
          Badcaps Legend
          • Jun 2012
          • 9535
          • Canada
          #3
          Re: What is this SMD component?

          If you can provide, the make, model, or board number, there might be a schematic or other information around.

            Comment

            • 73buick
              Member
              • Mar 2011
              • 41
              • USA
              #4
              Re: What is this SMD component?

              Its for a HP 15-DB0011DX
              HP Motherboard part#L20478-601
              PCB# EPV51 LA-G078P, Rev. 1.0

                Comment

                • SMDFlea
                  Super Moderator
                  • Jan 2018
                  • 20649
                  • UK
                  #5
                  Re: What is this SMD component?

                  There`s no schematic available. The part next to it is TSL1 ,if you google "Compal TSL1" for schematics with the same part number you can sometimes find what you`re looking for.
                  It could be a 10 pF, 3 kV, 1808 capacitor, i only looked at an la-a994p schematic,i could be completely wrong.
                  Attached Files
                  Last edited by SMDFlea; 02-01-2020, 07:23 AM.
                  All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                    Comment

                    • R_J
                      Badcaps Legend
                      • Jun 2012
                      • 9535
                      • Canada
                      #6
                      Re: What is this SMD component?

                      I would tend to agree it is a capacitor so It won't be the problem

                        Comment

                        • dreamflowers09
                          Member
                          • Feb 2012
                          • 31
                          #7
                          Re: What is this SMD component?

                          Anyone having schematics?

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • corrize
                              A funny fuse story – Lumix LX100 II
                              by corrize
                              Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
                              I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
                              The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
                              There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
                              And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
                              10-19-2023, 09:58 AM
                            • jesterace
                              Samsung UE46ES8000 Blown fuse but no other signs of short
                              by jesterace
                              Hi I wonder if anyone might be able to steer me in the right direction. I have this Samsung UE46ES8000 TV and it went bang during use. The main fuse on the PSU board is open. I've checked every diode/mosfet/transistor I can see and nothing appears to be short to cause the fuse to go. The DC output of the bridge rectifier is not short either. I've seen online that some of these models are known for having their PFC mosfet or other mosfets shorting and blowing the fuse but i'm not seeing that here. If anyone aware of these models having any issues to cause this? I'm reluctant to just replace the...
                              09-11-2024, 03:14 PM
                            • jshhh
                              Help replacing fuse on my Mimaki CJV300-160 vinyl printer
                              by jshhh
                              Hi guys,

                              I'm inexperienced with electronics repairs, I've done a little bit of soldering caps and whatnot, but i have a blown fuse on this mimaki printer I got which I have bought a replacement for.

                              How do I remove this type of fuse (see picture)...it kinda looks like it would pull out of that bracket but it didn't come at first pull and I didn't want to brute force it incase it's soldered on there like most of the rest of the components.

                              Anybody know how to remove this type of fuse?

                              (The fuse is toward the bottom of the image labeled F2)...
                              06-17-2025, 01:35 AM
                            • Babbar
                              Argon SA1 audio amplifier power-supply - fuse blown after fixing the short?
                              by Babbar
                              I found a project in the electronics trash yesterday. A nice Argon SA1 audio amp with some electrical issue. Took it apart and saw that the 4A250V fuse was blown so started lifting components to find the short. Eventually got to two MOSFETs (model FTA14N50C) that are shorted and when i took them out the short was gone.

                              Now i didn't have any replacements of the same model of course but i found a couple with pretty similar spec i thought (K10A60D & K12A50D) and put them in. Also replaced the blown fuse with a 3.5A250V one. Checked another time for short circuit and plugged it in....
                              04-12-2024, 01:12 AM
                            • drykid
                              Matsui 175S microwave fuse replacement
                              by drykid
                              Hi,

                              I recently picked up a used Matsui 175S microwave that was powering up (starts, turntable rotates) but not heating. From looking online the most likely culprit was the fuse, but unfortunately in this one the fuse had heated up and fused with the (badly designed) fuse holder and couldn't be removed. I guess this might indicate further issues beyond the fuse itself but at this stage I just want to replace the fuse and see how I go from there.

                              Anyway since I couldn't get out the fuse itself the easiest fix was to replace the fuse holder assembly that runs between the...
                              12-21-2020, 01:15 PM
                            • Loading...
                            • No more items.
                            Working...