the board is : 6050A2301901-mb-A02
power issue:
the power button 3v is present, but when press it the volt will stay 3v and will never be zero, even if i touch the 2 pins of the power jumper,
the 5v and 3v are both present
i tried to flash the bios
the bios battery was zero and changed it
iput 330 uf x4 instead of token
the charge is working fine, i found the 3.3v on battery pinouts
one thing i get is 1 led with no life
power issue:
the power button 3v is present, but when press it the volt will stay 3v and will never be zero, even if i touch the 2 pins of the power jumper,
the 5v and 3v are both present
i tried to flash the bios
the bios battery was zero and changed it
iput 330 uf x4 instead of token
the charge is working fine, i found the 3.3v on battery pinouts
one thing i get is 1 led with no life
Comment