MODEL
ELL INSPIRON 15-5000 SERIES
PLATFORM: LA-B843P REV 1.0
PROBLEM:PLUGGED IN CHARGING BUT PERCENT NOT GOING UP.
Measurement of BQ737 with adapter plugged in with battery
PIN01-19V
PIN02-19V
PIN03- 0V
PIN04- 0V
PIN05- 0V
PIN06-2.46V
PIN07- 0V
PIN08-3.2V
PIN09-3.2V
PIN10-2.97V
PIN11-2.97V
PIN12-15.6V
PIN13-15.6V
PIN14- 0V
PIN15- 0V
PIN16-6.0V
PIN17-15.3V
PIN18-15.6V
PIN19-15.6V
PIN20-19V
I know that pin 17/18/19v is wrong as pin18 is HIDRV and I'm not getting the requisite voltage and hence gate of Pu4405 is not opening. But i couldnt find it whats wrong.
PU4201 pin4-3v and pu4402 pin4 is 1.7v which is correct.
PQ4201 and PQ4202 Voltages are ok as per schematics.
PR4205 is 33.3 Ohms and i"m getting PSID_EC signal.
PD4401-pin2 is 6v but pin1 remains 15.6v.
I've replaced BQ737 with a known good IC(same bq737) and even replaced PU4405/06 with SI412 but with no change.
I request members here to guide me.

PLATFORM: LA-B843P REV 1.0
PROBLEM:PLUGGED IN CHARGING BUT PERCENT NOT GOING UP.
Measurement of BQ737 with adapter plugged in with battery
PIN01-19V
PIN02-19V
PIN03- 0V
PIN04- 0V
PIN05- 0V
PIN06-2.46V
PIN07- 0V
PIN08-3.2V
PIN09-3.2V
PIN10-2.97V
PIN11-2.97V
PIN12-15.6V
PIN13-15.6V
PIN14- 0V
PIN15- 0V
PIN16-6.0V
PIN17-15.3V
PIN18-15.6V
PIN19-15.6V
PIN20-19V
I know that pin 17/18/19v is wrong as pin18 is HIDRV and I'm not getting the requisite voltage and hence gate of Pu4405 is not opening. But i couldnt find it whats wrong.
PU4201 pin4-3v and pu4402 pin4 is 1.7v which is correct.
PQ4201 and PQ4202 Voltages are ok as per schematics.
PR4205 is 33.3 Ohms and i"m getting PSID_EC signal.
PD4401-pin2 is 6v but pin1 remains 15.6v.
I've replaced BQ737 with a known good IC(same bq737) and even replaced PU4405/06 with SI412 but with no change.
I request members here to guide me.
Comment