Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Help a newbie with his first project

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
    #61
    Re: Help a newbie with his first project

    Originally posted by JaroTech View Post
    It will be difficult to find these capacitors.
    Yep, what would happen if I were to keep PD5 removed? PU100 outputs the correct voltage now.

    Comment

      #62
      Re: Help a newbie with his first project

      But the motherboard does not work! You need 3.3V for the RTC section.

      Comment

        #63
        Re: Help a newbie with his first project

        Long time, haven't been able to look at the board again before now.

        I measured two caps show in the picture, they both come out as 0-1ohm on both ends...

        https://i.imgur.com/nPxuWBG.jpg

        Comment

          #64
          Re: Help a newbie with his first project

          Originally posted by JaroTech View Post
          But the motherboard does not work! You need 3.3V for the RTC section.
          Hope you can help me again!

          Comment

            #65
            Re: Help a newbie with his first project

            Originally posted by jacobtc View Post
            Hope you can help me again!
            Of course, but I have to reread what is your problem and what I wrote. We will resume where we left off.

            Comment

              #66
              Re: Help a newbie with his first project

              Originally posted by JaroTech View Post
              Of course, but I have to reread what is your problem and what I wrote. We will resume where we left off.
              Sure!

              Comment

                #67
                Re: Help a newbie with his first project

                Originally posted by JaroTech View Post
                Of course, but I have to reread what is your problem and what I wrote. We will resume where we left off.
                Did you get through it all?

                Comment

                  #68
                  Re: Help a newbie with his first project

                  Originally posted by jarotech View Post
                  of course, but i have to reread what is your problem and what i wrote. We will resume where we left off.
                  bump..

                  Comment

                    #69
                    Re: Help a newbie with his first project

                    Originally posted by JaroTech View Post
                    Of course, but I have to reread what is your problem and what I wrote. We will resume where we left off.
                    Bump, I would gladly appreciate your help!

                    Comment

                      #70
                      Re: Help a newbie with his first project

                      BUMP! I really need help getting further through with the project!

                      Comment

                      Previous 1 2 3 4 template Next
                      Working...
                      X