MAX1632 chip compatible

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lcdcaps1
    Badcaps Veteran
    • Oct 2011
    • 322

    #1

    MAX1632 chip compatible

    Hi

    I am looking for a MAX1632 chip but cannot find one without paying unreasonable prices

    Is there a compatible one that i can use
    it is to replace one on a old Toshiba laptop motherboard

    Maybe someone has one spare that they could send to me please as it would really help me out very much

    I hope someone can help
    Many Thanks
  • caspian
    Badcaps Legend
    • Oct 2015
    • 1589
    • Laptop

    #2
    Re: MAX1632 chip compatible

    take a look at this thread to find a replacement:
    https://www.badcaps.net/forum/showth...hlight=MAX1632

    I do not know whether those mentioned replacements for MAX1632 actually work or not.
    I recommend you buy the same exact IC model from a local distributor.

    Comment

    • lcdcaps1
      Badcaps Veteran
      • Oct 2011
      • 322

      #3
      Re: MAX1632 chip compatible

      ok thanks but would anyone have a spare one please

      Comment

      Related Topics

      Collapse

      • acedogblast
        Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
        by acedogblast
        This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

        There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
        11-02-2024, 05:13 PM
      • Troystain
        Help EZP2023+ updated chip database for w25q256jveq?
        by Troystain
        Hello, anyone here have updated ezp2023+ chip database in .dat file format.

        I need to add w25q256jveq chip but I do not know what data should I type.

        I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers

        The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....
        11-25-2024, 12:53 AM
      • thxd43
        Lenovo laptop does not turn on, what does this number mean in a BIOS chip?
        by thxd43
        Hello, first of all, excuse me, I am using the translator, English is not my native language.

        I have a Lenovo ideapad 330S - 14IKB laptop.



        The tablet did not recognize me when I connected it, so I checked the device manager and I realized that there were many with the exclamation mark, so one by one I began to update their drivers until the sign disappeared of admiration, I even updated the BIOS, and the laptop rebooted normally and worked, so far so good, but the tablet still did not recognize me, I read on the internet that it could be due to a...
        02-23-2023, 08:37 PM
      • Azurain
        Elitebook 840 G5 Bios Chip Soldering Question
        by Azurain
        Hi everyone,

        I have an HP Elitebook 840 G5 that I am trying to get working again. I've removed the front bios chip (the 32mb one) and have run it through HP unlocker already. I've uploaded and verified the new bin, but am now experiencing an issue that has led me to believe I've been soldering the chip back to the motherboard incorrectly.

        Essentially, after re-soldering the chip back into its place and reassembling the laptop, the charging light immediately flashes orange and white and then shifts to a solid white. The capslock and numlock lights blink seven times...
        04-14-2023, 06:58 PM
      • ebugs
        Asus laptop EC/SIO chip replacement
        by ebugs
        Asus Vivobook 15 (board X513ea R2.0) gone dead when user plugged an iPhone cable into the USB-C port during boot. Now there's no LED light, no power at all. I checked all MOSFETs and capacitors, no shorts found. The board only has 3.3V and 5V present, no other voltages.

        I injected 3.3V into the EC chip power rail (ITE IT5125VG 128), and it draws 80mA, while the 3.3V LDO chip RT8249C has a max output of 100mA. I checked the boardview and found there are only two chips on this 3.3V rail, EC and Realtek audio chip. So I think EC could be the problem.

        I found the EC chip...
        09-14-2024, 02:09 AM
      • Loading...
      • No more items.
      Working...