Icf cdk-50

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • terryfunku
    New Member
    • Jan 2018
    • 5
    • United States
    #1

    Icf cdk-50

    Soooo, this device has no external antenna port. Antenna is built into the power cord. Which equals.... you guessed it.... bad reception.

    Any help in pointing out the FM antenna location among this device's guts would be greatly appreciated.
    Attached Files
    Last edited by terryfunku; 01-30-2018, 08:32 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • mikey5791
      Sony CFS-5000S radio cassette player no FM reception
      by mikey5791
      Hi forum members,

      In the past i have had many helpful hints from generous forum members in diagnosing and solving issue related to most of my electrical things.

      Fyi, i have been keeping this unit of Sony radio cassette player as the cassette belting has worn off but the radio has been working fine before. Recently, out of a sudden i found out i can't get any radio reception at all (no signal from FM,MW or SW band) except some buzzing warp noise from the speakers.

      I opened the casing inside and checked for any dry solder, burned component or loose wires...
      02-24-2023, 03:48 AM
    • Mark R
      Does Changing Out Caps In A Tuner Effect FM Reception
      by Mark R
      "TQ" Subject at hand is a Marantz 120 tuner. The tuner lit up but no output. Recapped the entire unit. Before it was working fine tuning in Stereo and Mono. Now it just about tunes Stereo and some of the mono stations are weak. Nothing else was changed. When you do hit a stereo station the stereo lamp will come on but flickers as it's trying to hold the MPX signal.

      I don't see how bringing the unit back with new caps checked by my Sencore LC103 would effect the FM section. Every Value is as it was from the factory?

      Any Thoughts?
      06-11-2024, 07:04 PM
    • Dannyx
      "Kinetic" 433Mhz transmitter/receiver discussion
      by Dannyx
      Good day folks.

      TL;DR: has anyone tried pairing one of THESE "kinetic" battery-less switches with THESE generic remote modules ?

      Details: I recently got hit by this craze of wanting to add remote controls to the lights around my house, so I went with those generic 433Mhz remote relay modules found everywhere, which are really basic, easy to use and work well, since I used them before in other projects. What I like most about them is they accept all kinds of 433Mhz remotes that float around Aliexpress, since they're all the same under the hood, save for the...
      03-08-2022, 11:01 AM
    • japlytic
      The difference between reception and coverage
      by japlytic
      And the reasons for the distinct differences are simple: reception mainly concerns a broadcast receiver and coverage concerns a transceiver such as a mobile phone or two way radio.
      01-07-2020, 06:06 AM
    • barry wilkins
      Citreon C3 car radio poor reception
      by barry wilkins
      I have a problem with the radio in my car ,its been going on for some time now.
      Just poor radio reception,it has got a small aerial at the back of the car .
      I can see a nut head holding the aerial by looking through a hole where the rear light dome is ,but it looks as if I will have to remove the roof lineing to get at it.
      What I dont know if there is an amplifier any where ?
      I think its a Bosch radio but it does not have a name on it.
      Does any body have any info on this?
      Thanks

      Barry
      01-05-2020, 01:31 PM
    • Loading...
    • No more items.
    Working...