Ite it8585vg

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jasko_jacker
    Badcaps Legend
    • Oct 2014
    • 1137
    • italy

    #1

    Ite it8585vg

    Hi
    The ite it8585vg bga versione need to be programming ? If yes, how programmer work Well with this type of chip svod or rt809f ?
    Thanks
  • goo12
    New Member
    • Dec 2015
    • 4
    • RO

    #2
    Re: Ite it8585vg

    hi, same question from me. i have asus ux302 and mby someone have the dump from IT8585VG if it's programmable. Thank you!

    Comment

    • jasko_jacker
      Badcaps Legend
      • Oct 2014
      • 1137
      • italy

      #3
      Re: Ite it8585vg

      the IT8585E it's programmable with svod, (https://www.youtube.com/watch?v=OwqRR-43jbs not in english).
      Svod is very expansive , as alternative there is rt809f and new rt809h.
      I send this question to http://dr-bios.com/forum/question/sv...al-support-493 but no response.

      Comment

      • gcomputers
        Badcaps Veteran
        • Apr 2013
        • 509
        • Albania

        #4
        Re: Ite it8585vg

        i bought vertianov with 90usd and work fine

        Comment

        • highpulse
          i hate HP
          • May 2013
          • 1488
          • portugal

          #5
          Re: Ite it8585vg

          hey guys , he is meaning about 8585VG BGA sio ... not the regyulçar 8585E

          8585VG is not programable .
          8585E is PROGramable !

          Comment

          Related Topics

          Collapse

          • araxnido
            Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
            by araxnido
            Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

            When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
            06-10-2025, 09:26 PM
          • subroto
            Programmable and non-programmable SIO list
            by subroto
            ene kb9012 programmable
            ene kb9016 programmable
            ene kb9018 programmable
            ene kb9022 programmable
            ene kb9028qc programmable
            ene kb9010 programmable
            ene kb3930qf/b1 programmable
            ite it8585e programmable
            ite it8586e programmable
            ite it8985e programmable
            ite it8587e programmable
            ite it8522 programmable
            ite it8987e programmable
            ite it8589 programmable
            ite it8522 programmable
            ite IT8380E programmable 192kb
            ite IT8380VG programmable 192kb
            ite IT8995E-128 programmable
            ite it8886H...
            01-13-2018, 09:15 AM
          • Jamescameron696969
            does RT809F with PEB1 support IT8227vg?
            by Jamescameron696969
            I have RT809F but i don't have PEB1 extension. i wanna buy PEB1 but i'm not sure if it supports IT8227vg in Lenovo K14 gen1.
            i wanna ty to unlock it using RT809F and PEB1.
            maybe someone here tried to do it using RT809F.
            any suggestions?
            02-18-2024, 05:28 AM
          • Jamescameron696969
            KB9022Q to RT809F help please
            by Jamescameron696969
            i'm using RT809f i dont have the idea of the pinout. can someone send here the correct pictue for RT89F?

            KB9022Q to RT809F...
            04-07-2024, 02:49 AM
          • kevin_allein
            RT809F ZIF socket operation
            by kevin_allein
            Hi, I bought a RT809F from China. When I connect it to a LCD Monitor with HDMI, it auto detects the EEPROM and can read and program it.
            However I have 2 different 8 pins EEPROMs and wanted to read them out. It neither detects the ICs correctly, nor can it read them even if I select the device.
            If I measure voltage between pin 4 (GND) and 8 (VCC), I measure 0V. Obviously operation cannot work without voltage.

            Any tips what I am doing wrong ?...
            05-14-2025, 09:28 AM
          • Loading...
          • No more items.
          Working...