It's quantity. Do you want two for 99p or ten for £1.62
It's forward direction as the contacts are on the same side. It's reverse if they are on different sides.
Pitch is the distance between the centre of one contact and the next.
What is happening to the cables for them to all need replacing ? Are you ripping them out of the connectors without releasing the clips ?
Stick the parameters in the Farnell website. You will have to go for a 20cm and 10cm cables. If its 3mm wide and has 6 cores then that would be 0.5mm pitch.
Now I need to peel back some of the ribbon cable and stick the blue plastic bit some how.
The touchpad needs another ribbon cable.
Or could I fix the 6 pin connectors with the blue thing??
I think I'll go to Hobby craft for the glue gun.
Seems like a better deal than Ebay
The blue plastic bit can be stuck back on with a small amount of double sided tape. Some people use super glue but i don't recommend it as any spill will get you into trouble.
Originally posted by PeteS in CA
Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
Comment