Notebook Lenovo Z510 (AILZA NM-A181 REV:1.0)

[razor_amd]

Good day.

I got few questions for you:

I got this laptop today with strange problem. When the power is connected the current draw from power supply is around 200mA (0.20A). I have both standby voltages but the strange thing is that the CPU coils are heating a bit and the voltage is 1.7V both either CPU inserted into motherboard or not.

The Lenovo IT8586 FXA chip is heating a lot but the strange part is that the CPU voltages are present on both coils even if the board is not powered on. I presume the ITE chip is bad and I have to change it.

When buying ITE chip, what about versions: FXA, FXS, EXA, EXS, CXA, CXS? Any explanation about the letters? Do I have to order the same version or I can put another one?

Any info is appreciated.

Attached are some pictures also with thermal vision.

Thank you!

[trmrtts]

Re: Notebook Lenovo Z510 (AILZA NM-A181 REV:1.0)

hi my friend

Ihave same problem.did you fix this problem?and can we use fxa to fxs?

[boyebaran]

Re: Notebook Lenovo Z510 (AILZA NM-A181 REV:1.0)

ite8586 is programmable(By SOVD programer).
http://www.svod.od.ua/produktsiya/124-programmer-kb9012