G86-730-A2 replacment

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Djosla
    Badcaps Veteran
    • Dec 2012
    • 246
    • Montenegro
    #1

    G86-730-A2 replacment

    i have G86-730-A2 that failed...
    I now that it can be replaced G86-730-A2 and G86-731-A2...

    Has anyone tried G86-303-A2 instead ,will it work without modification? ...that is only one i have in spare...
    Tags: None
    • Djosla
      Badcaps Veteran
      • Dec 2012
      • 246
      • Montenegro
      #2
      Re: G86-730-A2 replacment

      ???????

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          HP EliteBook 850 G5 + Mini Dock, Bag & Spare AC Adaptor Notebook 800 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP EliteBook 850 G5 + Mini Dock, Bag & Spare AC Adaptor Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 850 G5 + Mini Dock, Bag & Spare AC Adaptor boardview and 850 G5 + Mini Dock, Bag & Spare AC Adaptor schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant...
          09-06-2024, 08:50 AM
        • Petr0x
          Bosch 12V and 18V chargers modification
          by Petr0x
          Hi, I would like to share with you small modification to your Bosch tool 12V and 18V chargers.

          You can use it for almost all Bosch chargers what I have seen, for example part numbers GAL 18V-20, GAL 18V-40, GAL 1880, GAL 18V-160, AL 1820, AL1115CV, AL1130CV.

          Bosch (today also other brands using the same system like Wurth, Fein) does not care if you destroy your batteries, because they can sell you new ones. So the marketing is telling you only about speed of the charging, so you will not wait for your batteries to charge too long. Me as a customer want the tools and batteries...
          05-24-2024, 01:00 PM
        • Califauna
          Help with boom box modification
          by Califauna
          Hi, this is more of a project help request than a troubleshooting question. I hope I can post it here.

          I have a W-King D8 Bluetooth boom box which I'd like to modify with some external speaker output jacks and some buttons to switch the internal speakers on and off.

          From factory the specs of the boom box are:

          -Power Input: DC 5V
          -Speaker Output Power: 2 x 25W ( confirmed by Youtube channel Hartdegen review as 12.5W RMS per channel)
          -Drivers:
          -2 x Woofer, 70mm, 10Ω, 70mm,15W
          -2 X Tweeter, 8Ω, 30mm,10W x 2
          -Frequency...
          12-04-2021, 01:53 PM
        • x_orange90_x
          Backlight Reflector Modification
          by x_orange90_x
          I am writing this because I came looking for the same information but couldn't find anything. There are certain model tvs that will have 2 or more different backlight strip configurations and there is often no way to tell exactly what you have without disassembling the panel. Twice now I have run into this issue and ended up ordering the wrong sets BOTH times. The previous TV I reordered the correct ones and went on my way. The second one I had no patience for returns or reorders, let alone peeling the brand new strips back out and risk damaging them.

          The number of LEDs per pair is...
          03-12-2024, 08:32 AM
        • sam_sam_sam
          Bauer tool battery pack charging with a HERCULES charger modification
          by sam_sam_sam
          The Bauer power tool battery charger just has to many issues with the charger over heating because I several HERCULES Hercules battery chargers that are 3 amp charge and because they have gone on quite a few times over the years before they came out with the fan cooling battery charger I going to modify one so I can charge Bauer battery packs faster than the crape battery charger that they have

          Here is how this modification is going to be done I taking a 1.5 amp hour battery enclosure and gutting it removing the battery cells and replacing some Ryobi 1.5 amp hour battery pack that...
          05-06-2023, 12:17 PM
        • Loading...
        • No more items.
        Working...