L300D powers off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rookieme
    Badcaps Veteran
    • Oct 2014
    • 396
    • Greece

    #1

    L300D powers off

    It is the model with amd cpu and doesn't have the NEC TOKIN capacitor.
    If powers off also with the battery only.
    At first had no power issue that was fixed by replacing kbc WPCE775.
    Also the cpu was dead but I have an exact same working one.
    It boots but stays on about 20 secs before powering off.
    Doesn't matter if it is at bios menu or at boot media selection.
    Also programmed the bios from Toshiba site.
    The Board is 6050A2174501-MB-A03.
    The voltage at the coils is:
    L10 - 1,22V
    L16 - 3,37V
    L17 - 5,11V
    L3 - 1,82V
    L507 - 1,12V
    L506 - 1,12V
    L508 - 1,3V

    Forgot to mention that someone had resoldered the bios before, don't know what else he might have done.
    Attached Files
    Last edited by rookieme; 12-19-2015, 05:19 AM.

Related Topics

Collapse

  • Document Archive
    Toshiba Satellite Pro L300D-224 Specification for Upgrade or Repair
    by Document Archive
    This specification for the Toshiba Satellite Pro L300D-224 can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the L300D-224 boardview and L300D-224 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
    09-06-2024, 05:27 AM
  • Document Archive
    Toshiba Satellite Pro L300D-22E Specification for Upgrade or Repair
    by Document Archive
    This specification for the Toshiba Satellite Pro L300D-22E can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the L300D-22E boardview and L300D-22E schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
    09-06-2024, 05:27 AM
  • malogro
    Acer Nitro 5 AN515-55-55M1 [GH51G mb] powers on, no vcc_core
    by malogro
    Hello all,

    I'm stumped on this guy, so wanted to see if anyone has any further ideas:

    Intro:

    This is an Acer Nitro 5 AN515-55-55M1 with unknown prior history (bought "as-is" on eBay). It charges the battery and powers on from both AC adapter and battery, so I think this rules out main power issues.

    Upon attempt to boot, it will "reboot" (meaning powers down and then powers on again) only once, and then stays stuck in a status of lights on / no post / no monitor. Powering on with fn+esc maxes out the fans on first boot attempt,...
    04-14-2023, 04:44 PM
  • jose6326
    Samsung s32d850t powers off
    by jose6326
    Powers on as normal shows an image then powers off after 10 seconds

    I have to unplug it from the wall and replug to get it to turn back on but then shuts off

    No blown caps
    I searched for this model but nothing comes up...
    11-29-2024, 11:21 PM
  • simwalsh
    Philips 47PFL4606 Powers on, works normal then powers off after a minute
    by simwalsh
    Hi,
    I am new to this forum and have searched for some answers with problems similar to mine.
    Philips TV powers on as normal for about a minute or less then click and no power at all not even standby light. If i disconnect from mains and reconnect it will power on again but for a shorter time. Once i leave it disconnected from main for a longer time it will power on for a longer period the next time.

    It sounds like a power supply issue?

    I have the board out and want to run some tests. Not sure what i should be doing but i put a 1k resistor across SB and +5v...
    12-04-2023, 04:03 AM
  • Loading...
  • No more items.
Working...