Toshiba_Qosmio X75-a7298 over heating and graphic card goes error and stop

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sanehdeep2012
    Senior Member
    • Oct 2013
    • 139
    • india

    #1

    Toshiba_Qosmio X75-a7298 over heating and graphic card goes error and stop

    Toshiba_Qosmio X75-a7298
    over heating and graphic card goes error and stop after working of 10-20 min
    i have replaced all tentulum capacitors on graphic card

    when itis working itis working fine , even on norma operation it wirking allthe time ok,


    but when playing game (like Need for Speed Rival)graphic card stop working after 10- 30 min of working on game play,

    pl reply what i can check or do


    thanks all bad cap team and supporting person on this form

  • Ramee
    Badcaps Veteran
    • Jul 2014
    • 218
    • Israel

    #2
    Re: Toshiba_Qosmio X75-a7298 over heating and graphic card goes error and stop

    Replace the graphic chip or get a gaming desktop.

    Comment

    Related Topics

    Collapse

    • x_orange90_x
      Seven Leagues Slot Machine stop button issues
      by x_orange90_x
      I don't know if anyone here has experience with Japanese slot (pachislo) machines, but I sure hope so. I bought this machine last week in semi-working order. It would play and the reels would spin, but the stop buttons would not stop them at all. I found that the high-frequency filtering tantalum capacitor was bad on the reel stop board, along with the fuse being blown. I replaced the fuse and removed the capacitor. I haven't replaced the cap yet because I didn't have one on hand, but it's not necessary for the operation of the machine.

      The issue now is the Stop buttons are intermittently...
      02-12-2025, 10:01 AM
    • knk2729
      dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad
      by knk2729
      dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad
      06-23-2025, 07:09 PM
    • EasyGoing1
      The best way to drive a heating element?
      by EasyGoing1
      I've got this circuit that I've been playing with on a breadboard. I'm not happy with it mainly because the MOSFET gets too hot and generally controlling the temp of the heating element with the Arduino has proven to be a little more cumbersome than I would like.

      What I would like to know, is what is the best way to set up a circuit like this? The heating element is just a PCB and its going to be mounted under a 3D-printed enclosure that a lizard will use to warm his belly.

      This is the general setup that I have now.



      This is what the...
      01-25-2023, 11:29 AM
    • Cemal Odabasioglu
      MacBook Pro A1707 Motherboard Diagnostic Help – CD3215 heating and Fluctuating Rails
      by Cemal Odabasioglu
      Hello everyone,

      I'm currently diagnosing a MacBook Pro A1707 motherboard that does not power on. I've gathered some data but am stuck and need expert advice.
      Note that i'm a beginner in electronics and i'm trying to learn while trying to repair this macbook that my work gave me. I'm really curious and love understanding how thing works and i already learned so much.

      Only one usb c port is taking 20v and have 12.5v on PPBUS_G3H. when trying other ports, 2 are not going to 20v and one is going to 20v but the CD3215 is getting really hot.

      Observations...
      01-14-2025, 03:54 PM
    • shybear
      Razer Blade 15 Advanced (RZ209-033) graphic card issue
      by shybear
      hi,
      this laptop works but temperature rise too much. I dismounted mb and cleaned well. There was a lot of dust inside.
      I think that there is a graphic chipset issue because when I power the machine I get this error:
      "the detected discrete gpu VBIOS is not meant for this system"
      This make me think that maybe the gpu VBIOS has to be re programmed.
      BTW someone already worked on this mainboard. Near graphic board there is Winbond flash memory that I think its stored the VBIOS.
      I attach some pictures and one of message error I get when I power on the ...
      03-26-2025, 02:36 PM
    • Loading...
    • No more items.
    Working...