Dell Inspiron 5567 - KBC Programming

[gutkin]

Hi colleagues. I have a Dell Inspiron 15 5567 with a BAL21 LA-D802P A00 motherboard. The fault lies in the KBC, which is a MEC1404-NU.
I need to replace it with a new one. I understand that these come blank and I need to program the firmware corresponding to this Dell. But I can't find that firmware. Any ideas on how to solve my problem?
If I buy a "new" chip, will it work by just reading the BIOS?
If it can be reprogrammed, what programmer do you recommend?

[reformatt]

Firmware is in the BIOS executable from Dell. You can extract it by using platomav's utilities:

https://github.com/platomav/BIOSUtilities

There is a thread on here on how to use it. It's based on Python scripts so there some pre-requisites. But I've attached it here anyway. You'll need some way to program it too with a SVOD or similar.

[reformatt]

Firmware is in the BIOS executable from Dell. You can extract it by using platomav's utilities:

https://github.com/platomav/BIOSUtilities

There is a thread on here on how to use it. It's based on Python scripts so there some pre-requisites. But I've attached it here anyway. You'll need some way to program it too with a SVOD or similar.

[gutkin]

Firmware is in the BIOS executable from Dell. You can extract it by using platomav's utilities:

https://github.com/platomav/BIOSUtilities

There is a thread on here on how to use it. It's based on Python scripts so there some pre-requisites. But I've attached it here anyway. You'll need some way to program it too with a SVOD or similar.

Thanks!