Announcement

Collapse
No announcement yet.

toshiba C660

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    toshiba C660

    this laptop arrived to me dead , i found Sl6251ahaz-t_qsop24 dead and Isl95831 very hot
    i changed both but i got a new problem with pq204 (schematic included) keeps shorting
    thanks:
    http://ar.rghost.net/57639135

    #2
    Re: toshiba C660

    ok!
    what side?
    take it off and see witch side its shorted to ground!
    Just cook it! It's already broken.

    Comment


      #3
      Re: toshiba C660

      you have to move to the right and keep testing.
      take PL210 and see if you still got short.
      charging rail may be shorted
      Just cook it! It's already broken.

      Comment


        #4
        Re: toshiba C660

        Originally posted by dj_ricoh View Post
        you have to move to the right and keep testing.
        take PL210 and see if you still got short.
        charging rail may be shorted
        i mean that pq204 is not shorting in its place, its place is not shorted, but when i insert a new ic and put the ac adapter , then the ic is shorted.

        Comment


          #5
          Re: toshiba C660

          then its much easy.
          take them out and test all the fets around. chg_b+ all the line you got like 4-5 fets.
          inject 1v on the charging line near the coil and see if you feel something gets hot.

          try something maybe you get lucky!
          if you do anything post the results.
          good luck
          Just cook it! It's already broken.

          Comment


            #6
            Re: toshiba C660

            Originally posted by dj_ricoh View Post
            then its much easy.
            take them out and test all the fets around. chg_b+ all the line you got like 4-5 fets.
            inject 1v on the charging line near the coil and see if you feel something gets hot.

            try something maybe you get lucky!
            if you do anything post the results.
            good luck
            i injected 1 v on the coil and saw 0.58 A but no thing is hot
            Attached Files

            Comment


              #7
              Re: toshiba C660

              the problem is that if you left the coil there its hard to know.
              you must take it out and see where it goes with 0.5 A.
              you understand me right? its like put your hand in front when you cant see.
              you need to see where it drains to go that way.
              Simple
              Just cook it! It's already broken.

              Comment

              Working...