Rog ally stop charging HELP

[VeVaz]

I need to disassemble again the rog ally 😓
but when i made the injection the cells was giving 14.8v.
14.8.when i connect the charger and measure the values it gives 14.9v and after seconds it starts blinking and give the same value as the cells 14.8v.
i think it can really be the battery.
As the BMS it's not comunicating the EC and PD make a dumb comunication and gives only a little bit more than the 14.8v
When i only had 14.7v it was giving 14.8v.
idk if it make sense what i'm saying but it's my theory.
Already purchased only a battery for the Ally, will come in 3-4 days and then i will install the new one and check if it do anything.

[VeVaz]

I made the jumper as Raziel19935 have done, after that it started to show the orange led charging and then the blinking part but it's better than not showing anything.
i plugged a charged with the cable damaged with the positive touching the negative, and after than the rog never turn on again, seeing the orange led was like a call from the rog saying " yeah bro i'm still alive "