15-cc105nt --ram slot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • baki60
    Senior Member
    • May 2020
    • 78
    • Türkiye

    #1

    15-cc105nt --ram slot

    1 of the ram slots has a blue screen (restart) problem
    Masters, I would like to benefit from your experience.
  • dokma
    Member
    • Aug 2017
    • 39
    • Croatia

    #2
    Did you check the RAM slot pins? They can easily go cold. Give them all a good nudge with tweezers.

    Comment

    • baki60
      Senior Member
      • May 2020
      • 78
      • Türkiye

      #3
      I checked them all one by one under the microscope

      Comment

      • dokma
        Member
        • Aug 2017
        • 39
        • Croatia

        #4
        Did you go through this: https://www.badcaps.net/forum/troubl...ements-working

        There's a few errors on the pin numbers in the first post. Read the whole thread.

        Comment

        Related Topics

        Collapse

        • totoagung2
          by totoagung2
          Totoagung2: Situs Slot Gacor Paling Gampang Jackpot di Indonesia 2024


          Hadirnya situs slot gacor gampang jackpot Totoagung2 yang menyediakan banyak sekali permainan slot terpopuler terkini yang hadir setiap tahun nya. Tentunya di Indonesia sendiri yang menjadi salah satu negara yang favorit bagi provider game slot. Banyak sekali pengembang permainan melihat negara tanah air Indonesia untuk menjadikan dan mencoba berbagai kesempatan bisnis judi online yakni games judi slot Totoagung2 terbaik dan terpercaya no 1. Hal itu juga dibuktikan dengan sangat banyaknya provider mesin slot...
          01-01-2024, 02:43 PM
        • shouri
          Dell latitude e5490 auto restart
          by shouri
          Hi guys, can someone help me?

          I have an issue with laptop dell latitude e5490 that auto restart when arrive at certain point in loading windows.
          Board model is dm70 la-f401p rev:1.0 2017-09-20.

          At first, the issue is sometime ssd sata 2.5 not detected. i already try another cable, at certain point, it ok using old cable (i mean sata cable here).
          After a few days test, is seems ok.

          Days later, another issue come, that is auto restart when certain point in loading windows. i already test another ssd, another ram, another sata ribbon, still same....
          12-10-2024, 09:27 PM
        • Lifeisfun
          Trying to troubleshoot DDR4 SODIMM slot with slot tester
          by Lifeisfun
          Hi folks!
          I have some kind of memory problem on Lenovo laptop. I was initially able to install windows after several tries since the laptop did freeze in middle of those attempts.
          Eventually I discovered that it was related to moving the laptop.
          Later on it even stopped booting unless I pressed around the memory slot. (no keyboard LEDs only power button responds)
          If I remove the RAM I get the beeps that RAM is missing. Inserting the RAM there is silence and it will not boot most of the time. No picture.

          I removed the board got one of those memory slot testers...
          06-04-2025, 02:26 PM
        • szepesif
          Lenovo Ideapad 3 15IIL05 working perfectly with onboard RAM but it doesn't start when I add a memory into the RAM slot
          by szepesif
          Hey guys!

          I don't know the solution to this problem, but this is definitely not unique and I would like to figure out the solution to fix these in the future.

          I have two identical Lenovo Ideapad 3 15IIL05 laptops with integrated 4GB DDR4 memory. Both work perfectly with that. BUT... if I add any extra memory to the single RAM slot, it never gives a picture. I thought the RAM slot pins would be the problem but no, all pins are solid (I checked them under the microscope). The RAM in the slot has 1.2V, so the voltage is present on the module. I flashed the latest BIOS, so
          ...
          04-19-2025, 10:18 PM
        • Byte_76
          Faulty memory slot on Tekram Slot 1 motherboard
          by Byte_76
          I have a Tekram P6PRO-A5 Rev. 1.01 which has an issue with one of the memory slots and with the floppy port.

          When a memory module is installed into the slot which is closest to the north bridge, the board will beep and won't post. The same memory module works in the two remaining slots.

          Also, the floppy drive does not work regardless of bios settings.

          Please help me to identify the possible cause of the faulty memory slot and the floppy drive port as well.

          I have examined the board under my digital microscope and did not find any broken traces....
          04-12-2025, 06:58 AM
        • Loading...
        • No more items.
        Working...