Asus F555L dead no power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vpower
    Senior Member
    • Sep 2022
    • 111
    • italy

    #1

    Asus F555L dead no power

    Hi, I have this Asus F555L that suddenly died. No charging led when connected to a working charger. Motherboard is X555LD rev. 3.3. I already tested the input voltage and all looks good, 19v is present. Any hint? I'm also looking for schematics and boardview. Thanks in advance.
    Attached Files
  • mon2
    Badcaps Legend
    • Dec 2019
    • 13829
    • Canada

    #2
    See attached. Measure the voltage to ground on each of the DCin mosfets PQ8801 / PQ8802.

    Confirm the charger IC has a voltage of 6 volts on REGN.


    Click image for larger version

Name:	asus1.png
Views:	162
Size:	191.4 KB
ID:	3315632

    Comment

    • vpower
      Senior Member
      • Sep 2022
      • 111
      • italy

      #3
      Originally posted by mon2
      See attached. Measure the voltage to ground on each of the DCin mosfets PQ8801 / PQ8802.

      Confirm the charger IC has a voltage of 6 volts on REGN.


      Click image for larger version

Name:	asus1.png
Views:	162
Size:	191.4 KB
ID:	3315632
      PQ8801
      pin 1-2-3 19v
      pin 4 no reading
      pin 5-6-7-8 19v

      PQ8802
      pin 1-2-3 19v
      pin 4 no reading
      pin 5-6-7-8 19v

      where is charger ic located?

      Comment

      • vpower
        Senior Member
        • Sep 2022
        • 111
        • italy

        #4
        Originally posted by mon2
        See attached. Measure the voltage to ground on each of the DCin mosfets PQ8801 / PQ8802.

        Confirm the charger IC has a voltage of 6 volts on REGN.


        Click image for larger version

Name:	asus1.png
Views:	162
Size:	191.4 KB
ID:	3315632
        maybe it's helpful information:
        while connected to the original charger,the ic I marked with an arrow is burning hot, I almost hurt myself.
        the capacitors near this ic are not shorted.
        Attached Files

        Comment

        • mon2
          Badcaps Legend
          • Dec 2019
          • 13829
          • Canada

          #5
          Attached. Measure the resistance to ground of the large power inductor PL8200.

          Click image for larger version  Name:	PL8200.png Views:	0 Size:	57.8 KB ID:	3315673

          Click image for larger version  Name:	charger_ic.png Views:	0 Size:	62.0 KB ID:	3315664
          Last edited by mon2; 07-24-2024, 01:57 PM.

          Comment

          • vpower
            Senior Member
            • Sep 2022
            • 111
            • italy

            #6
            [QUOTE=mon2;n3315663]Attached. Measure the resistance to ground of the large power inductor PL8200.

            1,37 kohm on both sides

            Comment

            • vpower
              Senior Member
              • Sep 2022
              • 111
              • italy

              #7
              [QUOTE=mon2;n3315631]See attached. Measure the voltage to ground on each of the DCin mosfets PQ8801 / PQ8802.

              Confirm the charger IC has a voltage of 6 volts on REGN.


              2,5 volt

              Comment

              • vpower
                Senior Member
                • Sep 2022
                • 111
                • italy

                #8
                [QUOTE=vpower;n3315681]
                Originally posted by mon2
                See attached. Measure the voltage to ground on each of the DCin mosfets PQ8801 / PQ8802.

                Confirm the charger IC has a voltage of 6 volts on REGN.


                2,5 volt
                sorry, pin 16 of PU8800 is 6volts

                Comment

                • mcplslg123
                  Badcaps Legend
                  • Jun 2015
                  • 7262
                  • india

                  #9
                  This uP1589Q ic is your 3V/5V regulator . Measure resistance to GND on 3VREG/5VREG popularly known as LDO.

                  Comment

                  • vpower
                    Senior Member
                    • Sep 2022
                    • 111
                    • italy

                    #10
                    uP1589Q:
                    PIN 14 389 ohm
                    PIN 15 130 ohm

                    Comment

                    • mcplslg123
                      Badcaps Legend
                      • Jun 2015
                      • 7262
                      • india

                      #11
                      Hmm, both the readings are bad.Should be in Kohms.
                      Remove the IC and then measure resistance to GND on pin14/15 of this IC.
                      Is it same or different?

                      PS: Dont apply power while this regulator is removed.

                      Comment

                      Working...