ZERO THUNDEROBOT TRZERO still bad B0 memory chio after replace. did i count chips wrong?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3553
    • slovakia
    #1

    ZERO THUNDEROBOT TRZERO still bad B0 memory chio after replace. did i count chips wrong?

    Hallo.
    Have this ZERO THUNDEROBOT TRZERO that have lines on display when using discrete GPU 3070. I find bad chip B0, but after replace i have still bad B0. did i count chips wrong?

    model - TR ZERO
    sn- JT009700400J0M9R81D1
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ktmmotocross
      RTX 2080 11GB after memory replace, now many small errors on all chips
      by ktmmotocross
      I have this MSI RTX 2080 11GB, that after memory replace works for hour. after that i have many small errors on all chips randomly and card crash under memory load.

      when i heat card with low resolution furmark, ater minute i can switch to hi res test and it work ok. when power off pc for few minutes, card crash under hi res test gain
      04-15-2022, 03:01 AM
    • feherhollo
      WSON8 NEW Bios Chips READ, ERROR, ETC.
      by feherhollo
      Hi,
      I asking for help on some new WSON8 256MB chips. Please share your experience. I faced error on some new chips on read, erase, write with different programmers. These new chips are not exist in any programmers database. (GD25B256D, XM25RH256, W25Q256JV so on.)
      I'm using RT809F V.5.0, EZP2023 Pro, CH341A Green

      For the exact experience with GD25B256DYIG is RT809F erase the chip under 33sec. This kind of 256MB chip normal erase time is 70-120sec so I think not all the partitions are erased. If I do blank check or reread the buffer says FFFFFF but when I write the correct...
      11-26-2023, 09:33 AM
    • piernov
      NVidia bumpgate
      by piernov
      Just archiving everything related to bumpgate since most stuff has disappeared from Google. Maybe people will finally take the time to read some of it and stop shouting "reflow gpu" at every occasion but rather try to understand what the real issue is…
      Interesting parts about the failure analysis are "Why Nvidia's chips are defective" and "Why Nvidia's duff chips are due to shoddy engineering"


      May complete this post at a later date with more details.
      Basically issue is a combination of thermal dissipation of the chip with hotspot,...
      03-27-2021, 10:34 AM
    • DeanWy
      WD Sentinel DS5100 (NAS) boot issues
      by DeanWy
      Hi all,

      I have a Western Digital Sentinel DS5100 NAS system which has stopped working. It has dual BIOS. I bought the system second hand with an already broken primary BIOS (it rebooted multiple times until second BIOS was used).

      It worked until recently. The system was idle in Windows Server 2012 and a BSOD occurred, I think it was 'critical process died'. Thereafter it didn't boot, it just sat there with no video output and fan speed at 100% (there's a proprietary Windows driver by WD which controls the fan, outside of that it always runs at 100%).

      There...
      07-30-2024, 04:13 AM
    • Healdealer
      Dell G5 15 5590 - No ram detected ( 2,3 )
      by Healdealer
      It looks like i did a mistake when changing some settings for the ram with setup_var_3 commands in grub.

      First it worked all for unlock undervolting, but then i changed the frequency or i used a wrong var value..

      Now no boot and no screen.

      Led code 2 amber 3 white no ram detected.

      I installed 2 different new ram but no luck.

      RTC reset not helping
      Cmos reset not helping

      I tried everything what the manual say and what i could find elswhere.

      Is there a possibiliTy to revert my mistake ?
      Why is...
      08-20-2024, 06:34 PM
    • Loading...
    • No more items.
    Working...