Announcement

Collapse
No announcement yet.

HP 625 no power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP 625 no power

    Hi all,

    I have a HP 625 with inventec mb, it doesn't power on, there is 3.3V on power button but it doesn't launch motherboard. As I checked 3V + 5V present on mb and no short on anywhere, I suspect the BIOS, what do u think ?

    [/IMG]
    [/IMG]
    Last edited by tomodachi; 09-30-2013, 02:05 AM.

    #2
    Re: HP 625 no power

    check voltages on bios chip and also battery terminal

    Comment


      #3
      Re: HP 625 no power

      Originally posted by alihomee View Post
      check voltages on bios chip and also battery terminal
      They are ok at 3.3V

      Comment


        #4
        Re: HP 625 no power

        i thing re work amd chip

        Comment


          #5
          Re: HP 625 no power

          BIOS reflashed and mobo worked, thanks all.

          Comment


            #6
            Re: HP 625 no power

            Originally posted by tomodachi View Post
            BIOS reflashed and mobo worked, thanks all.
            attach the bios file and the mobo number plzz
            Just cook it! It's already broken.

            Comment


              #7
              Re: HP 625 no power

              Here you go.
              Attached Files

              Comment


                #8
                Re: HP 625 no power

                Originally posted by tomodachi View Post
                Here you go.
                Thanks for sharing files. just wondering how to flash bios on a laptop that will not start? I have the same problem so I therefore interested.

                Comment


                  #9
                  Re: HP 625 no power

                  Use external programmer, remove the bios ic from the board and connect it to the flasher after that you solder it back

                  Comment


                    #10
                    Re: HP 625 no power

                    The same problem, fixed with your dump. Thank you!

                    Comment


                      #11
                      Re: HP 625 no power

                      Originally posted by tomodachi View Post
                      Here you go.
                      100% working
                      Thank you

                      Comment


                        #12
                        Re: HP 625 no power

                        Originally posted by robrock1 View Post
                        Use external programmer, remove the bios ic from the board and connect it to the flasher after that you solder it back

                        Is it possible to use that file on corrupt bios chip

                        Comment

                        Working...
                        X