Acer Aspire D270 dead

**whaldsz** · 09-09-2013, 11:58 PM

Re: Acer Aspire D270 dead

OK. Based on your readings, you need to replace the chip. You should have 3.3V at pin 8, 5V at pin 17, 2V at pin 3.

**corell** · 09-10-2013, 12:56 AM

Re: Acer Aspire D270 dead

Originally posted by whaldsz

OK. Based on your readings, you need to replace the chip. You should have 3.3V at pin 8, 5V at pin 17, 2V at pin 3.

thank you very much sir.. i hope RS Components have this chip..

**whaldsz** · 09-10-2013, 01:02 AM

Re: Acer Aspire D270 dead

They don't sell that kind of chip.

**corell** · 09-10-2013, 01:14 AM

Re: Acer Aspire D270 dead

Originally posted by whaldsz

They don't sell that kind of chip.

do you know sir were to buy this chip in our country?

**dycc** · 09-10-2013, 07:16 AM

Re: Acer Aspire D270 dead

change chip

**magewengcy** · 09-29-2014, 07:37 AM

Re: Acer Aspire D270 dead

same prob here mga kabayan acer d270 wet motherboard please help am a newbie here

**q4midz** · 10-01-2014, 07:49 PM

Re: Acer Aspire D270 dead

i have same problem acer D270, replace PU3, Pq13,Pq14,Pq16 & Pq17 but 3v & 5v still 0Volt

**fddizon** · 10-01-2014, 09:51 PM

Re: Acer Aspire D270 dead

try re-flow first before replacing

**mar347** · 09-08-2015, 08:56 AM

Re: Acer Aspire D270 dead

Originally posted by fddizon

kabayan,

check this out...

I'm new in this group.
I've the same power on problem. I downloaded the schematic but where can I find the password to open it?

**sudhirpaul** · 10-14-2015, 03:00 AM

Re: Acer Aspire D270 dead

thank you
did not find the thanks button

Comment