Announcement

Collapse
No announcement yet.

HP Compaq 6530s

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP Compaq 6530s

    this laptop :
    when plugging the adapter, the leds on the plugins works great
    when pushing power button, the led of the plugins disappear, and the led of the power button works, but after 1-2 seconds the laptop shuts off.
    i examined the cpu it is very cold,
    i removed the cmos battery then the computer will cycle on then off by its own with no heat on cpu
    the code displayed is: 00

    #2
    Re: HP Compaq 6530s

    try to reheat the igp with hot air for a minute, the try to power up.
    graphic dry joint is a common error

    Comment


      #3
      Re: HP Compaq 6530s

      no success , i noticed also when trying to power up the lan leds flashing

      Comment


        #4
        Re: HP Compaq 6530s

        What about a reflow? Do you have voltages for RAM, NB, SB, CPU?

        Comment


          #5
          Re: HP Compaq 6530s

          i am seeking for schematic with no success. i found A03 but i have A04 with intel and not amd
          also i found the voltage on battery charger is 3.3v but when trying to power on the laptop , this volt reduces to 3.28v
          on I/O the volt is 3.3 v but when trying to power on it disappears completely

          Comment


            #6
            Re: HP Compaq 6530s

            Look for the inductors on the board - big square components, usually has a 3R3 marking or similar. When you power on your laptop you should have voltages on every of them except on the one by the battery. Also this one will have voltage if you connect the battery.

            Comment


              #7
              Re: HP Compaq 6530s

              good day do you have bios ???

              Comment

              Working...
              X