Announcement

Collapse
No announcement yet.

Acer Nitro 5 Dead

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jasonr2000
    replied
    Re: Acer Nitro 5 Dead

    Originally posted by Th3_uN1Qu3 View Post
    Check for 3.3v on battery connector first, with adapter plugged in. That way we can get an idea where to start measuring.
    im getting the following on the battery connector 0.27v

    Originally posted by mcplslg123 View Post
    Does 19V crosses after first dc-in mosfet?
    yes its passing the first dc-in mosfet.
    Last edited by Vesko356; 09-05-2023, 12:49 PM. Reason: Posts merged.

    Leave a comment:


  • jasonr2000
    replied
    Re: Acer Nitro 5 Dead

    Originally posted by Roti View Post
    Measure the voltages and resistances from all coils. Is the motherboard LA-H501P? How much current does the motherboard take when plugged in?
    there are the readings for the resistance


    hi thanks for the reply I have my meter set to 2000 ohms

    and get the following readings

    PL301 34 ohms

    PL501 my meter shows it counting up then 1 (I think means out of range)

    PLB1 my meter shows it counting up then 1 (I think means out of range)

    PL1101 30 ohms

    PCV36 my meter shows it counting up then 1 (I think means out of range)

    PLW1 144 ohms

    PLV2 26 ohms

    PLV3 24 ohms

    PCV139 33 ohms

    PLH1 52 ohms

    PLA1 35 ohms

    PLZ4 34 ohms

    PLZ3 32 ohms

    PLZ2 33 ohms

    PLZ1 33 ohms

    PLG1 37 ohms

    PCZ47 my meter shows it counting up then 1 (I think means out of range)

    PLM1 311 ohms

    UV49 measures 440 ohms pins 5 6

    UV49 measures pin 1 no reading pin 2 1356 ohms

    UH2 measures pin 1 no reading pin 2 646 ohms

    UH2 measurers pin 5 27 ohms pin 6 571 ohms

    all the reaadings was done with my meter set to 2000 ohms

    Leave a comment:


  • jasonr2000
    replied
    Re: Acer Nitro 5 Dead

    Originally posted by Roti View Post
    Measure the voltages and resistances from all coils. Is the motherboard LA-H501P? How much current does the motherboard take when plugged in?
    yes its the LA-H501P motherboard.


    and ok ill check for that thanks

    Originally posted by Th3_uN1Qu3 View Post
    Check for 3.3v on battery connector first, with adapter plugged in. That way we can get an idea where to start measuring.
    thanks ill check for that also today
    Last edited by Vesko356; 09-05-2023, 12:48 PM. Reason: Posts merged.

    Leave a comment:


  • mcplslg123
    replied
    Re: Acer Nitro 5 Dead

    Does 19V crosses after first dc-in mosfet?

    Leave a comment:


  • Th3_uN1Qu3
    replied
    Re: Acer Nitro 5 Dead

    Check for 3.3v on battery connector first, with adapter plugged in. That way we can get an idea where to start measuring.

    Leave a comment:


  • Roti
    replied
    Re: Acer Nitro 5 Dead

    Measure the voltages and resistances from all coils. Is the motherboard LA-H501P? How much current does the motherboard take when plugged in?

    Leave a comment:


  • jasonr2000
    started a topic Acer Nitro 5 Dead

    Acer Nitro 5 Dead

    hi guys I have the above laptop

    Acer Nitro 5 AN515-45

    its dead as a dodo.


    im not sure where to begin checking for shorts.


    can anyone help ??


    many thanks

    Jason
    Attached Files
Working...
X