Re: Default HP X360 ( FAROE _DIS_X32_MB_MV 18742-1) no charging
Yes, these PCB measurements are now excellent.
You must replace mosfet #1. Mosfet #2 appears to be ok.
Solder the first mosfet back and continue to check after your rework. If the mosfet readings remain high, the mosfet and soldering are good.
Then solder back the 2nd mosfet. Measure again.
Then power up to test the logic board.
Yes, these PCB measurements are now excellent.
You must replace mosfet #1. Mosfet #2 appears to be ok.
Solder the first mosfet back and continue to check after your rework. If the mosfet readings remain high, the mosfet and soldering are good.
Then solder back the 2nd mosfet. Measure again.
Then power up to test the logic board.
Comment