FPC52 LA-H462P DIS GPU not working

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TonyCajeta
    Member
    • May 2022
    • 15
    • Mexico

    #1

    FPC52 LA-H462P DIS GPU not working

    Hello guys,

    I'm having trouble with this HP Pavilion Gaming, it has a discrete nvidia GPU, but it is not shown or recognized by device manager, i already update the BIOS to the last version, tried many drivers and there is no results.

    Well, now I'm working on the mainboard, there is no VGA_CORE voltage

    +19VB_GPU_FVDD is present.
    +0.95VS_VCCIOP is present

    +1.35VSDGPU not present.
    +VGA_CORE not present.

    VGA_CORE resistance to ground 1.2 ohm

    I don't have schematic for this model, just the boardview (below)

    It is my first try reparing a discrete GPU related problem, i see many signals but I don't know which one comes first.
    Last edited by piernov; 05-06-2023, 12:33 PM.

Related Topics

Collapse

  • valente222
    HP 14 LA-A993P REV 1.0, identify ic? and not susp# present
    by valente222
    I have a Mb LA-A993P REV 1.0 computer, I am guiding myself with these two shared boards. ;
    there are some ICs that are not the same, in this case those of the PU1501 (JD4TB) and PUH1 (NF4SA) images.
    n, please identify.

    330mA of consumption after 8 seconds turns off. +3VALW AND +5VALW present, EC_RSMRST# , LID_SW# , EC_ON# , ACIN# present.


    SUSP# NOT PRESENT, which would be this the problem does not turn on sub-sources Any leakage?

    I also notice that in the PLH2 coil that belongs to +1.05VS according to the drawings I am not sure,
    ...
    06-27-2024, 06:11 PM
  • air_chair256
    Lenovo Yoga 9I 15IMH5, MB LC40CM Won't Turn On, 1V_VCCGT is not present
    by air_chair256
    Hello,

    I have a Lenovo MB LC40CM 19863-1 when press button is pushed the keyboard backlight turns on and off twice and the power button light keeps blinking and the fans spins for a few seconds and stops then again spins and stops (Three times) then laptop turns off. no image on screen. sometime when you leave it for few days it will turn on and work but once you restart it won't turn on.

    Tried to reball RAM 1,2,3,4
    Checked all voltages on big coils all present except 1V_VCCGT is not present I get 0V on this rail. is this voltage should be present once power button...
    02-13-2024, 06:00 AM
  • javieromex
    Dell G15 5511 LA-K452P won't turn on
    by javieromex
    Hello, any help will be apprecited!
    • Model: Dell G15 5511
    • MB: LA-K452P
    • Issue: Won't turn on at all, no leds, no keyboard light, no fan spin, nothing happens when pressing power button. NOTHING.
    • Customer reported it was turned off and left plugged in during the night and thats it...
    • No signs of liquid damage or burned components.
    Link to Schematics -> https://www.badcaps.net/forum/troubl...la-k452p-gdp50

    I have checked so far:

    ...
    04-17-2025, 12:44 PM
  • Prott
    Surface Pro 7 - SLP_S4 present, then gone
    by Prott
    Hello fellow Badcappers,
    I have a problem with stubborn Surface Pro 7. I narowed it down to disappearing SLP_S4# (gone after around 200 ms).

    Everything else works as it should (the whole power on sequence succesfully finishes, all the voltages are present) until this signal goes missing - with it missing the AND gate causes ALL_SYS_PWRGD to go back low and this makes VCCIN drop to 0 V as well. Interestingly the SLP_S4_DRV# signal from SAM is still present for a second, even after SLP_S4 is no longer there. I wonder what could either cause PCH to stop sending the signal or what...
    12-03-2023, 06:11 PM
  • lapfix
    Lenovo IdeaPad 3 NM-C961.no display
    by lapfix
    Hello everyone.
    lap and motherboard : IdeaPad 3-15IGL05 Laptop - Type 81WQ
    NM-C961.
    Behaviour : connect charger it power on automatically ,reach 0.170 amp than down to 0.74 amp...no display.
    with battery connected it reach 980 amp than 870 ...no display
    No short ; no corrision no intervention before.
    Try 2 differents bios versions same behaviour.

    Some measuremets :
    PL 1600 = 5valw present
    pl 1100 = 3 vlalw present
    pl 100 = 0.221 v without battery and when battery connected 7.8 volt
    pl 6602 = 1.2 v
    pl 6603 = 1.056v...
    05-29-2025, 05:01 AM
  • Loading...
  • No more items.
Working...