hi can someone please clean me on this bios ? i get that imac stuck on the apple logo and clean me should fix the problem.
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: imac 820-00609 clean me needed
tnx for the help. flashed yor bios but same problem.. apple logo usb pendrive flashing but stuck on apple logo and do anything... no internet recovery no option start selection nothing....Comment
-
I have used the cleaned dump for my 820-00609, I can confirm that this originals_820-00609 (Me cleaned).rar worked perfectly. I thought to let the community know. Thanks to "hardware1", you are a legend.
Comment
-
Hi,
I got a iMac pro A1862 820-00967 in dead conditions, restored in apple configurator successfuly.installed macOS Catalina from internet recovery successfully but after installation it boots with apple logo way to the half of progress bar and shuts down.replugged 2 ssd's of 512GB and cleaned all the RAMs.Still not completely booting.tried PRAM reset but lo luck.Can any one guide me what should I do next. -
Bios needed for Apple iMac 2014 27" A1419 820-4652-A please.
Old file corrupted.
Clean ME if possible - I can change serial.
Thanks
-
Apple MacBook Pro and iMac Schematic & Board Vie
A2991 2023 820-02935 16 M3
A2780 2023 820-02652 16 M2
A2439 2021 820-02009 iMac 24... -
Hi Guys,
I need your help to check my BIOS, it stuck on 3/4 progress apple logo loading bar.
Thanks...03-15-2022, 12:49 PM -
Hi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...04-21-2025, 11:41 PM
Comment