HP ProDesk 400 G6 Small Form Factor PC bios

[hoaca388]

GOOD AFTERNOON, I HOPE YOU ARE WELL. WHO CAN HELP ME PLEASE? I PRESSED THE CMOS BUTTON ON MY PC AND IT WON'T BOOT. THE LED LIGHT ONLY LIGHTS UP WHEN I PRESS THE POWER BUTTON, AND IT DOESN'T DO ANYTHING ELSE. I'VE BEEN INVESTIGATING AND IT'S A BIOS PROBLEM. IT'S CORRUPT. I NEED YOU TO PLEASE SHARE THE BIOS FOR MY PC WITH ME. I DELETED THE ORIGINAL BIOS AND I DON'T HAVE A BACKUP. I WOULD LIKE YOU TO SHARE THE ORIGINAL. THE ONES YOU'VE SHARED HERE HAVE NOT WORKED FOR ME.

HP ProDesk 400 G6 Small Form Factor PC

Serial: MXL0383S6K

Product: 7ZE28LA

Thank you for your collaboration. Thank you very much.

Next time don't delete bios even if it's corrupted.

[arzammar]

HP ProDesk 400 G6 SFF needs a BIOS

Hello! There are 5 long and 7 short signals on this computer. I'm attaching the damaged bios. Please help me

[hoaca388]

HP ProDesk 400 G6 SFF needs a BIOS

Hello! There are 5 long and 7 short signals on this computer. I'm attaching the damaged bios. Please help me

Serial number ?

[arzammar]

Serial number ?

Serial No. CZC0298QZS
Product No. 9US27ES#ACB

[longtuoc]

Re: HP 400 G6 SFF Bios need



Here's your New bios file, try it and let me now the results.

Model Number: HP ProDesk 400 G6 SFF.
Serial Number: JPH943BYJF.

TEST OK, THANKS !

[hardware1]

TEST OK, THANKS !

You're welcome.

[lamkotien]

Serial number ?

Hello, I have a corrupted original bios file, please help me. Thanks.
-Serial: 1CZ932004W
-Product: 8EB64PA

[lamkotien]

Hello, I have a corrupted original bios file, please help me. Thanks.
-Serial: 1CZ932004W
-Product: 8EB64PA

"Edit content to comply with the rules."
HP Prodesk 400 G6 Small Form Factor
-Serial: 1CZ932004W
-Product: 8EB64PA
Current problem: The computer only boots to the HP logo then shuts down and restarts continuously, the F10 shortcut key to enter BIOS setup does not work.
Thank you so much for helping me.

[danito]

"Edit content to comply with the rules."
HP Prodesk 400 G6 Small Form Factor
-Serial: 1CZ932004W
-Product: 8EB64PA
Current problem: The computer only boots to the HP logo then shuts down and restarts continuously, the F10 shortcut key to enter BIOS setup does not work.
Thank you so much for helping me.

try

[lamkotien]

try

Thank you very much. I used the file you edited and filled in the DMI information from the .txt file, the computer booted successfully but during the boot process, the machine reported an error "System is booting in Manufacturing Program Mode...: 33". Is it serious?

[Wojtas83]

Hi everyone.
Could someone help me unlock the BIOS password for my HP Prodesk 400 G6 mini computer?

i add read bios whit password.

PN: 9AG50AV

SN: 8CC0440LD7

[SMDFlea]

Hi everyone.
Could someone help me unlock the BIOS password for my HP Prodesk 400 G6 mini computer?

i add read bios whit password.

PN: 9AG50AV

SN: 8CC0440LD7

Read https://www.badcaps.net/forum/troubl...35#post3175535

You`ll find a link to HPUnlocker in the Bios Guides sticky thread