Hi, If someone have Asrock 990fx extreme3 board schematic to share, thanks!
-
-
Re: Asrock 990fx extreme3 board schematic
There`s a boardview available but no schematic,as far as i know.
http://schematic-x.blogspot.com/2019...schematic.html -
Re: Asrock 990fx extreme3 board schematic
Thanks!Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hello friends!
I have an ASRock Z690 PG Riptide motherboard (rev.1.02) that had some bent processor socket pins. After fixing them, when I turned on the board, a spark came from an SMD capacitor on the back of the board. It still turned on and worked, but there could be a problem. I would like to know if anyone has the boardview so I can know which capacitor this is and if there is any other defect on the motherboard.
Thank you in advance for your collaboration.07-29-2025, 07:56 AM -
Looking for the schematic or board view of the ASRock Fatal1ty B450 Gaming K4 -
ASROCK 990FX EXTREME3 Motherboard Boardview
Rev 1.01...10-22-2024, 03:18 AM -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
Comment