[Request] HP 800 G3 mini Schematics
Hello
Anyone have hp 800 g3 mini schematics please?
Thank you!
Anyone have hp 800 g3 mini schematics please?
Thank you!
-
-
Re: [Request] HP 800 G3 mini Schematics
Not available
Scorpius MB Rev: A 16515-1 -
Re: [Request] HP 800 G3 mini Schematics
Damn and i have a unit without screen output and without error beeps (i removed RAM and no red led or beeps)
I tried:
bios reflash (from hp site .bin)
Cmos reset
Another cpu
Lots of RAM
but no luck, propably will end as a donor and will be replaced.Comment
-
Hello, all!
Maybe somebody can help me out with the schematics for this mainboard which is mounted in a No-Name Mini-PC: AZW_Ser4_V1.3
I think the CPU is a Ryzen 5 5500U.
Thank you very much!03-30-2025, 05:31 AM -
Hi,
my Intel Serpent Canyon NUC 12 Enthusiast PC model RNUC12SNKi7200U lost video output while watching video on YouTube.- I tried different cables and monitors and it keep loosing signal.
- The monitor "see" the PC connected to it but there is no image on it when boots.
- I can hear that the PC is rebooting fine to Windows desktop.
- In very rear occasions I can manage to get the image out but after restart or switched display port or to HDMI it wont give image again.
- What might be the problem? How to fix it?
11-16-2024, 06:18 PM -
I need schematics and boardview for the 820-02091-A / Apple Mac Mini (M1 2020) A2348. Can someone help me out?
Thanks! -
Hi,
I'm looking for assistance with a Mac mini (M4, 2024), model A3238 (Model MCYT4LL/A), which I recently purchased. The front USB-C ports are not providing power.
Upon inspection, I've identified that a chip and an adjacent capacitor have been physically ripped off the logic board near the SSD connector.
Could anyone provide information on the specifications of this missing chip? Additionally, I would greatly appreciate it if anyone has access to the schematics and board view for the Mac mini A3238 logic board.
Thanks for your help!
... -
Hi, I have an HP EliteDesk 705 G1 mini.
Model: HP EliteDesk 705 G1 Desktop Mini
Processor: AMD PRO A8-7600B
Motherboard PCB Marking: "APCB M3 94V-0" / "NPGC N-150TL"
BIOS Chip: Winbond 25PE20VG (2 Mbit SPI, 3.3V, 8-pin SOIC) and MX25L6473E 64Mbit (8MB), SPI NOR, 3.3V, 8-pin SOIC
Could someone help me with my bios , request:
unlock MPM/DMI with a BIOS patch/mod , dc tay42069 if someone could help me pls
Im gonna leave down below my working bios, if someone could mod it so it has the mpm...
Comment