I, too looking for Msi 1070 GTX Gaming X, mine water damage
The schematic is pretty much the same for most 10-series cards, including the component labels on the circuit board. Keeping in mind that the GP104 chip is used for everything from 1060 through 1080 (yes, there are GP106 versions of some 1060 cards). So the board has no reason to be different, other than adding more VRM phases for higher-powered cards. So manufacturers will play around with the VRM circuitry mostly, but they don't usually bother changing much else. Even the VRM controller circuit (uP9511P/Q) is usually the same, just might have different main switching MOSFETs. I repaired a Zotac 1070 mini yesterday, and this schematic was accurate for what I needed.
PS, just checked against a GP106 Zotac 1060, and it appears that the schematic still pretty much matches what's on that board too.
Hi, sorry if i'm on the wrong place here, but i'm looking for a boardviewer image for a XFX Geforce 8500GT, i' know its an old one. I've got this card for years and it shows no signs of life... suddenly, looking with a magnifyng glass, i' discovered there is a mosfet (or transistor) with a hole in it
Any help we'll be apreciated, even if somebody has one, perhaps with a simple hi-res picture maybe i'could figure out what component it is. Thanks on any answer !
I need a schematics for= RX 470 mining edition(sapphire)
RX480 mining sapphire
RX470/570 from all manufactures, i have a 40-50 RX470/570/480/580
And i have a SMD BGA station and all what i need for repair this cards, but i dont have a schematics.
Comment