Buenas noches, un favor alguien que pueda ayudarme con este problema esta placa me la regalaron por que tenia el problema que la prendes pasan dos o tres segundos y se apaga pasan tres segundo y se vuelve a prender sola y así sigue hasta que la desconectas. Ya le cambie fuente de poder, procesador, memoria RAM, pila, lo que no probé es medir voltajes si me pudieran indicar que voltajes buscar y donde, aparte estuve buscando información en internet y en algunos vídeos indicaban que el problema se debe a falla de la BIOS, tengo el programador y el programa pero me falta en archivo .BIN si alguien pudiera ayudarme por favor desde ya muchísimas gracias de corazon.
-
-
Re: Gigabyte h61m-ds2 rev 3.0 bios bin file
Use english -
Re: Archivo bin de Gigabyte h61m-ds2 rev 1.2 bios
As far as I can understand (even though I haven't learnt a lot of Spanish) is he has a GB H61M-DS2 board that powers up for 3 seconds and then shuts down, and that he said the problem is the BIOS went bad. He asks for a BIN file with the BIOS.Main rig:
Gigabyte B75M-D3H
Core i5-3470 3.60GHz
Gigabyte Geforce GTX650 1GB GDDR5
16GB DDR3-1600
Samsung SH-224AB DVD-RW
FSP Bluestorm II 500W (recapped)
120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
Delux MG760 case
Comment
-
Re: Archivo bin de Gigabyte h61m-ds2 rev 1.2 bios
Good evening, if Dan81 is correct, my problem is in the BIOS programming and I can not get the .bin file, try to program the BIOS with another .BIN file from another GIGABYTE board but it did not work, please, if you could help me I will really appreciate Dan81Comment
-
Re: Archivo bin de Gigabyte h61m-ds2 rev 1.2 bios
Try this bios .Comment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Can anyone clean the bios of the gigabyte RC55 notebook S/N:SN23091J000287. NP50RNCY0-D01-B motherboard.
The notebook is stuck on the logo.
I would appreciate it if someone helps me.... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
Comment