Lenovo thinkcentre M70q Gen 2 Logo

[fauzanmint]

The machine doesn't even switch on with this File no even fan spin.

now even with the Original backup still bricked

I'm so sorry if this makes you difficult. I just tried changing the flash logo in Dumb Bios with AMI logo changer.
actually I suggested trying to change the logo via Windows with any Lenovo logo changer tool
but I just realized that the forum prohibit sharing files directly.
I am sorry

[SMDFlea]

Thank you SMD I managed to remove it .... I put the jumper on the wrong pins
Thank you..

.Glad you fixed it .

[mtherana]

Can someone please Help remove SVP on this File Please..

Thank you SMD I managed to remove it .... I put the jumper on the wrong pins

Thank you..

[SMDFlea]

Are you sure you put the jumper on the right pins https://www.youtube.com/watch?v=2tyjdimosuk .

[mtherana]

Try this bios.

Can someone please Help remove SVP on this File Please..

[SMDFlea]

another question is the SVP not stored in this Bin file ? since on the corrupted one on POST #1 I was able to change the settings and even disabled computrace. main issue I couldn't get around was to remove the Logo since the official firmware only gave an option update the firmware.
thank you.

Havn`t had time to look.

[mtherana]

Try this bios.

another question is the SVP not stored in this Bin file ? since on the corrupted one on POST #1 I was able to change the settings and even disabled computrace. main issue I couldn't get around was to remove the Logo since the official firmware only gave an option update the firmware.

thank you.

[mtherana]

Here are the part numbers I couldn't find any jtags and have also tried to clear CMOS jumper

[SMDFlea]

Thank you SMD it now works but has SVP.

Post the EC chip part number, and look around the board for unsoldered JTAG ports

[mtherana]

It won`t work with unconfigured firmware. Read the ME cleaning guides https://www.badcaps.net/forum/troubl...22#post1622422

Thank you SMD it now works but has SVP.

[SMDFlea]

Try this one

It won`t work with unconfigured firmware. Read the ME cleaning guides https://www.badcaps.net/forum/troubl...22#post1622422

[SMDFlea]

can you please help me fix .

Try this bios.

[mtherana]

can you please help me fix .

[SMDFlea]

Your backup at post 1 does look corrupt, starting at 16D3D10 with repeated patterns and gibberish until a bit further on where it reads properly again. Its possible the corruption was already there but i`d put the blame on the clip.Only 1 byte needs to be corrupt for the bios not to work,and you wouldn`t see it by looking.
Verifying 2 of the same corrupt backups means the backups are the same,and still corrupt.

EDIT: It isn`t corrupt, having had a look at the bios update the weird code is the same . The ME firmware is corrupt though

[mtherana]

Did you verify before and after. You have made bad backups before so whats the reason ? ,are you using a clip, is the USB cable ok - try another one. Do you have another programmer you can try etc

https://www.badcaps.net/forum/troubl...e2#post3323890
https://www.badcaps.net/forum/troubl...g9#post3273024

Hello Sir and thanks for the response

I was using the CLIP for backing up. that means the problem began with the Clip and from now I must use the SOP8 Socket

how can I verify after backing up? UEFITool and was showing the Intel image was showing 4 Regions

and how can I now fix the file on Post #1

thank once again I thought by making 2 backups using the clip i will be safe.


thank you.

[SMDFlea]

Hi I did all that, 15min no fan spin no led light, the chip is making contact on all 8 pins. and no other file available anywhere else for M70q Gen 2 HB560 NM-D331 except Vinafix

Did you verify before and after. You have made bad backups before so whats the reason ? ,are you using a clip, is the USB cable ok - try another one. Do you have another programmer you can try etc

https://www.badcaps.net/forum/troubl...e2#post3323890
https://www.badcaps.net/forum/troubl...g9#post3273024

[mtherana]

well, put back original backup, check soldering and let it run for few minutes

Hi I did all that, 15min no fan spin no led light, the chip is making contact on all 8 pins. and no other file available anywhere else for M70q Gen 2 HB560 NM-D331 except Vinafix

[volinakis]

Is the no way to fix mine, its very strange I made 2 different backups but with both same results.

well, put back original backup, check soldering and let it run for few minutes

[mtherana]

it means your backup was corrupted. Usually, if you update bios it will pop up a window with a message about custom logo, if you wanna keep it or not.

Is the no way to fix mine, its very strange I made 2 different backups but with both same results.

[mtherana]

Try this one

it went dead after I used this file, are you sure its for the same model this is the motherboard P/N: IB5X0IL2 NM-D331

or maybe do you have EC file. please