Code board: MS-7A69 VER 1,0
Name board: B250M Mortar
Brand: MSI
I need boardview and schematic .
Name board: B250M Mortar
Brand: MSI
I need boardview and schematic .
-
PC work for schemaltic:
Mainboard: Gigabyte Z68XP-UD4
CPU: I3-3240
Ram: 16Gb
Graphic Card: GTX 1050Ti zotac 4Gb Mini
SSD: 120Gb
HDD: 2Tb
-
Answer selected by ductranvinh at 12-31-2023, 02:19 PM.
MS-7A69 VER 1.0 -
MS-7A69 VER 1.0Comment
-
Boardview
Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hello looking for a schematic, boardview, for a board GA-RX7PXE4 REV: 1.2. A laptop gigabyte aorus 17 xe4. A part has burned down, please help us identify it. Photo attached07-04-2025, 11:08 PM -
Device: Laptop
Brand: HP Omen 17
Model: AN012DX
Board number: G3BC R17M
Request: Boardview Schematic
Do you have/can you share Boardview and schematics please?03-02-2024, 07:24 AM -
Hi all,
I have here gaming laptop asus ROG with motherboard problem. Only orange LED is on, battery charging. 3.3V is on power button and on bios chip. 5V also present. All resistances on coils looks fine instead of GPU coils, only 0.5-0.6Ohms to ground. I don't know if gpu is dead. Can samoone help me to diagnose this problem? Thanks.
Have someone schematic/boardview for this board?
GX701GX REV. 1.6
... -
Hi everyone, I am trying to fix a B250M Mortar which doesn't power on, I have tested this with my old PSU which broke down while testing so I had to buy a new one which Im currently using now. I tested the ATX connector which only shows 5v, PS_ON# is active while ATX_PWR_OK is 0v. Power button 0v I am not too familiar with how to diagnose a desktop motherboard since I only do laptops for now, but I have checked coils and caps for short and have found nothing. I did bios reprogramming and didn't get any change. I have attached the BV and schematics, let me know if I need to check other pins....01-21-2024, 07:45 PM
Comment